NdFeB

N42 Disc Magnet

N42 disc magnets balance strong remanence with low cost across high-volume runs. YUECI KEJI presses, slices and finishes NdFeB discs to your diameter and thickness, with axial, diametric or radial magnetization and full lot traceability.

N42 Disc Axial / Diametric / Radial Custom size Coated to spec
N42 Disc Magnet - YUECI KEJI

Specifications

GradeN42
ShapeDisc
CoatingNi-Cu-Ni, Zn, Epoxy, Au (custom on request)
ToleranceDimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
MagnetizationAxial / Diametric / Radial
ApplicationsSensors and transducers, Voice-coil and speaker motors, Spacers and couplings
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export controlExport classification is confirmed per shipment against the product composition and destination.

What is an N42 disc magnet

N42 disc magnets are flat, cylindrical permanent magnets pressed and sintered from NdFeB (neodymium-iron-boron) powder, then ground to a precise diameter and thickness. The disc format — two large parallel faces and a short axial length — makes it the workhorse shape for stacking, holding and flux-target jobs where the field is wanted through the flat face. At YUECI KEJI the N42 grade is a balanced choice: it delivers strong remanence while staying economical across large production runs.

N42 magnetic performance

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

Why choose N42 over a higher grade

N52 is the strongest commercial NdFeB grade, but N42 trades a little energy product for better process yield on thin or large discs and a lower price per kilogram. For many holding, coupling and sensor jobs the difference in pull force is small while the cost saving is real, especially on high-volume programs. N42 also tolerates a wider range of aspect ratios without demagnetization risk during handling and assembly.

Shape, dimensional tolerance and magnetization

Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

Surface treatment

Test conditions and reports are available on request.

Typical applications

N42 discs appear in precision sensors and Hall-effect targets, speaker voice coils and micro-actuators, and as spacers, couplings and fixtures in automation. Their flat geometry suits any build where magnets are stacked, sandwiched or press-fitted into a bore. Because the grade is inexpensive relative to N50 or N52, it is also common in consumer and educational kits where volume is high and tolerance is moderate.

Handling, storage and shipping

NdFeB is brittle and strongly magnetic. Keep discs separated, store them away from cards and electronics, and use spacers for large stacks. For air freight, magnets must be packed so the package surface field stays within carrier limits; YUECI KEJI can supply declared packing that meets carrier limits on request. YUECI KEJI's quality system is aligned with IATF16949 and ISO 9001/14001/45001, and lots carry traceable inspection records.

If your drawing calls for a specific diameter, thickness or magnetization direction, Request a quote and the YUECI KEJI engineering team will confirm feasibility, coating and lead time.

Custom sizing, prototyping and order minimums

Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.

Grade, temperature and coating — how this part is specified

Test conditions and reports are available on request.

Designing the magnetic circuit and working on the line

Think of N42 Disc Magnet as one component in a magnetic circuit, not a standalone object. Pull force depends on the air gap, the mating steel thickness and flatness, and whether the field is allowed to close through a low-reluctance path; a small change in gap often changes hold more than a step up in grade. On the line, Sintered NdFeB is brittle, so thin discs and small cubes chip on edge and large blocks pinch — handle with spacers and never let pieces slam together. Keep parts separated with spacers, and keep them away from cards, electronics and pacemakers. The YUECI KEJI quality system is aligned with IATF16949 and ISO 9001/14001/45001, and each lot is inspected and traceable to its inspection record so you can document the part back to its production batch.

When to choose a different shape

This N42 Disc Magnet sits in a wider range of shapes made from the same material family. If your assembly needs a through-bore for a shaft or a rotating sensor, a ring or arc of the same grade may fit better; if the part must screw or clamp in place, a countersunk or assembled version removes the mounting problem; and if the envelope is fixed but the force target is not met, stepping the grade up within the family usually recovers more force than changing shape. Describe the function to YUECI KEJI and the team will propose the shape and grade together.

Where this material is typically used

In practice sintered NdFeB in this shape ends up in automotive actuators and sensors, industrial automation and robotics, consumer electronics and spindle motors, and renewable-energy and power-tool drives — anywhere a strong, compact field is needed at volume. It is the default rare-earth choice when cost per kilogram and energy product both matter.

Why buyers choose it

  • N42 gives a strong remanence of 1.28–1.32 T at a lower cost per kilogram than N50 or N52.
  • Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
  • Magnetization to drawing: axial through the face, diametric across the diameter, or radial for rotary sensing.
  • Coatings from bright Ni-Cu-Ni to non-reflective black epoxy for optical and medical builds.

Applications

Precision sensors, transducers and Hall-effect targets

Speaker voice coils, earpiece motors and micro-actuators

Spacers, couplings and automation fixtures

Buyer Questions

N42 Disc Magnet FAQs

Which magnetization direction should an N42 disc use?

Axial through the flat faces is standard for holding and stacks. Diametric or radial magnetization is used when the field must sit across or around the disc for sensing or rotary encoding. Send the sensing or torque direction and we orient it to drawing.

Can you hold a tight thickness tolerance on N42 discs?

Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

Are N42 discs export Export documentation and licensing requirements are confirmed per shipment.?

Export classification is confirmed per shipment against the product composition and destination.

Request a quote for N42