NdFeB

N42 Ring Magnet

N42 ring magnets are annular NdFeB parts with a concentric through-bore for shafts, rotors and encoders. YUECI KEJI holds the bore true to the OD and cuts axial, radial or multipole magnetization to drawing.

N42 Ring Concentric bore Axial / Radial / Multipole Coated to spec
N42 Ring Magnet - YUECI KEJI

Specifications

GradeN42
ShapeRing
CoatingNi-Cu-Ni, Zn, Epoxy, Au (custom on request)
ToleranceDimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
MagnetizationAxial / Diametric / Radial / Multipole
ApplicationsMotor rotors, Magnetic couplings, Rotary encoders
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export controlExport classification is confirmed per shipment against the product composition and destination.

What is an N42 ring magnet

N42 ring magnets are annular NdFeB parts with a through-bore, made by pressing and sintering a blank then grinding the outer diameter, inner diameter and thickness. The central hole lets the magnet sit on a shaft, pass a wire or bolt, or form part of a rotary assembly without a separate spacer. YUECI KEJI holds the bore concentric to the OD so the ring runs true in motors and encoders.

N42 magnetic performance

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

Why a ring rather than a disc

A ring keeps the field where you need it around a shaft or through a passage while freeing the centre for mechanical parts. In rotary applications the bore is the mounting feature, so the magnet and the rotating assembly share one axis. N42 is a sensible ring grade because its balance of flux and cost suits high-volume motor, coupling and sensor programs where the ring is one of many parts.

Shape, dimensional tolerance and magnetization

Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

Surface treatment

Test conditions and reports are available on request.

Typical applications

N42 rings appear in brushless motor rotors, magnetic couplings and clutches, rotary encoders and Hall-effect sensing, and as slip-on holding or indexing features on shafts. The through-bore is what makes them indispensable in anything that turns.

Handling, storage and shipping

NdFeB is brittle and strongly magnetic. Keep rings separated and away from cards and electronics, and avoid stacking them on a common shaft where they can snap together. Air-freight packing must keep the package surface field within carrier limits; YUECI KEJI can supply declared packing on request. YUECI KEJI's quality system is aligned with IATF16949 and ISO 9001/14001/45001, with traceable lot records.

If your assembly needs a concentric through-bore magnet, Request a quote for N42 rings and the YUECI KEJI team will confirm dimensions, magnetization and lead time.

Custom sizing, prototyping and order minimums

Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.

Grade, temperature and coating — how this part is specified

Test conditions and reports are available on request.

Designing the magnetic circuit and working on the line

Think of N42 Ring Magnet as one component in a magnetic circuit, not a standalone object. Pull force depends on the air gap, the mating steel thickness and flatness, and whether the field is allowed to close through a low-reluctance path; a small change in gap often changes hold more than a step up in grade. On the line, Sintered NdFeB is brittle, so thin discs and small cubes chip on edge and large blocks pinch — handle with spacers and never let pieces slam together. Keep parts separated with spacers, and keep them away from cards, electronics and pacemakers. The YUECI KEJI quality system is aligned with IATF16949 and ISO 9001/14001/45001, and each lot is inspected and traceable to its inspection record so you can document the part back to its production batch.

When to choose a different shape

This N42 Ring Magnet sits in a wider range of shapes made from the same material family. If your assembly needs a through-bore for a shaft or a rotating sensor, a ring or arc of the same grade may fit better; if the part must screw or clamp in place, a countersunk or assembled version removes the mounting problem; and if the envelope is fixed but the force target is not met, stepping the grade up within the family usually recovers more force than changing shape. Describe the function to YUECI KEJI and the team will propose the shape and grade together.

Where this material is typically used

In practice sintered NdFeB in this shape ends up in automotive actuators and sensors, industrial automation and robotics, consumer electronics and spindle motors, and renewable-energy and power-tool drives — anywhere a strong, compact field is needed at volume. It is the default rare-earth choice when cost per kilogram and energy product both matter.

Why buyers choose it

  • N42 gives strong remanence (1.28–1.32 T) at a low cost per kilogram for high-volume rings.
  • Bore held concentric to the OD so the ring runs true on shafts and in rotors.
  • Magnetization to drawing: axial, diametric, radial or multipole for encoders.
  • Coating stack-ups from bright Ni-Cu-Ni to black epoxy for corrosive or optical duty.

Applications

Brushless motor rotors and stators

Magnetic couplings, clutches and encoders

Slip-on holding and indexing features on shafts

Buyer Questions

N42 Ring Magnet FAQs

Can N42 rings be magnetized radially?

Yes. Axial, diametric and radial magnetization are all cut to drawing, and multipole magnetization around the circumference is available for encoder rings.

What tolerance can you hold on the bore?

Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

Are N42 rings export Export documentation and licensing requirements are confirmed per shipment.?

Export classification is confirmed per shipment against the product composition and destination.

Request a quote for N42