NdFeB

N42 Segment Magnet

N42 segment magnets are the economical curved pieces that nest into motor pole rings. YUECI KEJI grinds N42 segments to your radii, angle and thickness with radial, tangential or multipole magnetization.

N42 Arc / segment Radial / Tangential / Multipole Matched sets Coated to spec
N42 Segment Magnet - YUECI KEJI

Specifications

GradeN42
ShapeArc / segment
CoatingNi-Cu-Ni, Zn, Epoxy, Au (custom on request)
ToleranceDimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
MagnetizationRadial / Tangential / Multipole
ApplicationsVolume motor rotor segments, magnetic couplings and clutches, curved assemblies and pole rings
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export controlExport classification is confirmed per shipment against the product composition and destination.

What is an N42 segment magnet

N42 segment magnets are curved sintered NdFeB pieces that nest with their neighbours into a pole ring. The segment format is the standard way to build a multipole rotor: the pole count is set by the number of segments rather than by a custom magnetising fixture, and the N42 grade keeps the material cost low on high-volume rotor programs.

N42 magnetic performance

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

Why choose N42

N42 is the balanced grade: strong remanence at a moderate cost per kilogram, with the best process yield of the mid-range grades on thin sections and large diameters. It is the default choice when neither maximum flux nor minimum price dominates the brief.

Shape, dimensional tolerance and magnetization

Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

Surface treatment

Test conditions and reports are available on request.

Coating choice follows the environment: bright Ni-Cu-Ni for indoor and clean-room work, zinc for cost-sensitive volume, and epoxy where the part is handled, exposed to salt mist or must not glare. Bare NdFeB corrodes quickly, so every segment leaves the plant coated unless the brief explicitly calls for a phosphated or as-ground finish.

Typical applications

N42 segments end up in volume rotary machines: motor rotors, magnetic couplings and clutches, and curved assemblies where the pole must follow a radius. They are the default segment for any rotor that does not run hot.

Handling, storage and shipping

Sintered NdFeB is hard but brittle: it chips on impact and pinches fiercely when it snaps to steel. Parts ship in padded, magnetically shielded or spaced packing with keepers where the design calls for them, and air freight follows IATA packing instruction 902 with the field at the package surface measured before dispatch.

Custom sizing, prototyping and order minimums

Every dimension, grade suffix, coating and magnetization direction is built to your drawing or reproduced from your sample. Samples and small batches come first, then volume; repeat orders are faster because the tooling and the inspection routine already exist. Minimum order quantities are quoted per inquiry against the geometry and the grade.

Grade, temperature and coating — how this part is specified

A complete specification names the grade (including the temperature suffix), the shape and dimensions with tolerances, the magnetization direction, the coating and the destination. With those five points YUECI KEJI quotes quickly; with any of them missing the project waits. Working temperature is set by the suffix, not by the shape, and the coating is set by the environment.

Designing the magnetic circuit and working on the line

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

When to choose a different shape

A segment is the default for curved pole work. Move to a full ring when the annulus is continuous, to a block when the pole face is flat, and to a tile when the segment is a simple curved slab.

Where this material is typically used

Sintered NdFeB segments in this grade end up in volume motors, couplings and clutches — the high-volume rotary work of the magnet industry.

Why buyers choose it

  • N42 gives strong remanence (1.28–1.32 T) at a low cost per kilogram for high-volume segments.
  • Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
  • Radial, tangential or multipole magnetization cut to drawing for rotor duty.
  • Coatings from bright Ni-Cu-Ni to non-reflective black epoxy for optical and medical builds.

Applications

Volume motor rotor segments

Magnetic couplings and clutches

Curved assemblies and pole rings

Buyer Questions

N42 Segment Magnet FAQs

Can matched segment sets be supplied?

Yes. Segments for one rotor are ground, magnetized and inspected as a set so the pole pattern closes correctly around the ring.

Why choose segments instead of a full ring?

Segments waste less material on odd pole counts, are easier to magnetize multipole, and let a rotor be built from a standard segment rather than a custom annulus.

Are N42 segments export Export documentation and licensing requirements are confirmed per shipment.?

Export classification is confirmed per shipment against the product composition and destination.

Request a quote for N42