NdFeB

N45 Disc Magnet

N45 disc magnets lift remanence clear of N42 while staying economical in volume. YUECI KEJI presses, slices and finishes N45 discs to your diameter and thickness with axial, diametric or radial magnetization.

N45 Disc Axial / Diametric / Radial Custom size Coated to spec
N45 Disc Magnet - YUECI KEJI

Specifications

GradeN45
ShapeDisc
CoatingNi-Cu-Ni, Zn, Epoxy, Au (custom on request)
ToleranceDimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
MagnetizationAxial / Diametric / Radial
ApplicationsHigh-sensitivity sensors and encoders, speaker voice coils and micro-actuators, precision spacers and couplings
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export controlExport classification is confirmed per shipment against the product composition and destination.

What is an N45 disc magnet

N45 disc magnets are flat, cylindrical sintered NdFeB parts ground to a precise diameter and thickness. The grade sits in the middle of the commercial range: enough remanence to matter in a force budget, cheap enough to stay the default on volume programs. At YUECI KEJI the N45 disc is a routine line item, pressed, sliced, ground and coated to drawing.

N45 magnetic performance

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

Why choose N45

N45 lifts remanence and energy product clear of N42 without stepping into the process penalties of the high-fifties grades. It is the usual choice when a design was prototyped on N42 and the customer wants roughly 8% more flux in the same envelope.

Shape, dimensional tolerance and magnetization

Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

Surface treatment

Test conditions and reports are available on request.

Coating choice follows the environment: bright Ni-Cu-Ni for indoor and clean-room work, zinc for cost-sensitive volume, and epoxy where the part is handled, exposed to salt mist or must not glare. Bare NdFeB corrodes quickly, so every disc leaves the plant coated unless the brief explicitly calls for a phosphated or as-ground finish.

Typical applications

N45 discs end up in sensing and audio duty: Hall-effect targets, encoder poles, voice-coil and earpiece motors, and precision spacer stacks where the extra remanence buys margin without a redesign.

Handling, storage and shipping

Sintered NdFeB is hard but brittle: it chips on impact and pinches fiercely when it snaps to steel. Parts ship in padded, magnetically shielded or spaced packing with keepers where the design calls for them, and air freight follows IATA packing instruction 902 with the field at the package surface measured before dispatch.

Custom sizing, prototyping and order minimums

Every dimension, grade suffix, coating and magnetization direction is built to your drawing or reproduced from your sample. Samples and small batches come first, then volume; repeat orders are faster because the tooling and the inspection routine already exist. Minimum order quantities are quoted per inquiry against the geometry and the grade.

Grade, temperature and coating — how this part is specified

A complete specification names the grade (including the temperature suffix), the shape and dimensions with tolerances, the magnetization direction, the coating and the destination. With those five points YUECI KEJI quotes quickly; with any of them missing the project waits. Working temperature is set by the suffix, not by the shape, and the coating is set by the environment.

Designing the magnetic circuit and working on the line

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

When to choose a different shape

A disc is the default. Move to a ring when the part must mount on a shaft or let flux through the centre, to a countersunk disc when the magnet is also the mounting point, and to a block when a large flat pole area is worth more than a round one.

Where this material is typically used

Sintered NdFeB discs in this grade end up in sensors and encoders, audio and micro-motor duty, and precision spacer and coupling stacks — the jobs where a measurable step up from N42 pays for itself.

Why buyers choose it

  • N45 lifts remanence and energy product clear of N42 without top-grade cost.
  • Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
  • Magnetization to drawing: axial through the face, diametric across the diameter, or radial for rotary sensing.
  • Coatings from bright Ni-Cu-Ni to non-reflective black epoxy for optical and medical builds.

Applications

High-sensitivity sensors and encoders

Speaker voice coils and micro-actuators

Precision spacers and couplings

Buyer Questions

N45 Disc Magnet FAQs

How much stronger is N45 than N42?

About 8% more remanence and a 42–47 MGOe energy band against 39–44 for N42, so the same disc size delivers measurably more pull force.

Is N45 harder to machine than N42?

Marginally. Higher-energy powder presses and sinters with a little more care on thin sections, but everyday disc geometries run on the same line and the same 7–20 working day lead time.

Are N45 discs export Export documentation and licensing requirements are confirmed per shipment.?

Export classification is confirmed per shipment against the product composition and destination.

Request a quote for N45