NdFeB
N48 Disc Magnet
N48 disc magnets add about 10% more energy product over N42 in the same envelope, recovering pull force where the gap is fixed. YUECI KEJI finishes NdFeB discs to tight flatness with axial, diametric or radial magnetization.
Specifications
| Grade | N48 |
|---|---|
| Shape | Disc |
| Coating | Ni-Cu-Ni, Zn, Epoxy, Au (custom on request) |
| Tolerance | Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation. |
| Magnetization | Axial / Diametric / Radial |
| Applications | Sensors and encoders, Voice-coil motors, Thin spacers and couplings |
| Lead time | Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method. |
| MOQ | Quoted per inquiry |
| Export control | Export classification is confirmed per shipment against the product composition and destination. |
What is an N48 disc magnet
N48 disc magnets are sintered NdFeB discs that sit one step above N42 on the energy-product ladder, giving more flux from the same diameter and thickness. The disc shape keeps the field clean and axial for holding, stacking and flux-target work, while the higher grade lets designers recover pull force when the envelope is fixed. YUECI KEJI finishes N48 discs to tight flatness so they seat predictably in sensor and actuator stacks.
N48 magnetic performance
Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.
Where N48 discs earn their place
Moving from N42 to N48 adds roughly 10% more energy product without changing the alloy family, so designers often specify N48 when a sensor gap is tight or a holding force target is just out of reach for N42. The trade is a slightly higher material cost and a touch less process margin on very thin discs. For most disc geometries the difference is favourable, which is why N48 is a popular middle grade across automotive and industrial programs.
Shape, dimensional tolerance and magnetization
Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
Surface treatment
Test conditions and reports are available on request.
Typical applications
N48 discs are used in precision sensors, encoder targets and Hall-effect switches, in speaker voice coils and micro-actuators, and as thin spacers, couplings and fixtures. The extra flux over N42 helps where gap distance is fixed and force must be maximised within a small disc.
Handling, storage and shipping
NdFeB is brittle and strongly magnetic. Keep discs separated and away from cards and electronics, and use spacers for large stacks. Air-freight packing must keep the package surface field within carrier limits; YUECI KEJI can supply declared packing on request. YUECI KEJI's quality system is aligned with IATF16949 and ISO 9001/14001/45001, with traceable lot records.
If your drawing fixes a diameter and thickness but needs more force, Request a quote for N48 discs and the YUECI KEJI team will confirm grade, coating and lead time.
Custom sizing, prototyping and order minimums
Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
Grade, temperature and coating — how this part is specified
Test conditions and reports are available on request.
Designing the magnetic circuit and working on the line
Think of N48 Disc Magnet as one component in a magnetic circuit, not a standalone object. Pull force depends on the air gap, the mating steel thickness and flatness, and whether the field is allowed to close through a low-reluctance path; a small change in gap often changes hold more than a step up in grade. On the line, Sintered NdFeB is brittle, so thin discs and small cubes chip on edge and large blocks pinch — handle with spacers and never let pieces slam together. Keep parts separated with spacers, and keep them away from cards, electronics and pacemakers. The YUECI KEJI quality system is aligned with IATF16949 and ISO 9001/14001/45001, and each lot is inspected and traceable to its inspection record so you can document the part back to its production batch.
When to choose a different shape
This N48 Disc Magnet sits in a wider range of shapes made from the same material family. If your assembly needs a through-bore for a shaft or a rotating sensor, a ring or arc of the same grade may fit better; if the part must screw or clamp in place, a countersunk or assembled version removes the mounting problem; and if the envelope is fixed but the force target is not met, stepping the grade up within the family usually recovers more force than changing shape. Describe the function to YUECI KEJI and the team will propose the shape and grade together.
Where this material is typically used
In practice sintered NdFeB in this shape ends up in automotive actuators and sensors, industrial automation and robotics, consumer electronics and spindle motors, and renewable-energy and power-tool drives — anywhere a strong, compact field is needed at volume. It is the default rare-earth choice when cost per kilogram and energy product both matter.
Why buyers choose it
- N48 lifts (BH)max to 45–50 MGOe, about 10% more flux than N42 at the same size.
- Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
- Magnetization to drawing: axial, diametric or radial for encoding and torque sensing.
- Coating stack-ups from bright Ni-Cu-Ni to black epoxy for corrosive or optical duty.
Applications
Precision sensors, encoder targets and Hall-effect switches
Speaker voice coils and micro-actuators
Thin spacers, couplings and automation fixtures
Buyer Questions
N48 Disc Magnet FAQs
How much stronger is N48 than N42 in a disc?
N48 lifts the maximum energy product from 39–44 MGOe to 45–50 MGOe, about 10% more flux for the same disc size. The real-world pull-force gain depends on the gap, but designers typically feel the difference where the envelope is fixed.
Can N48 discs be magnetized diametrically?
Yes. Axial is standard, but diametric and radial magnetization are cut to drawing when the field must sit across or around the disc for sensing or rotary encoding.
Do N48 discs need export licences?
Export classification is confirmed per shipment against the product composition and destination.
Request a quote for N48
You may also like



