NdFeB
N48 Ring Magnet
N48 ring magnets combine upper-mid-range NdFeB energy with a through-bore for shafts and flux. YUECI KEJI grinds N48 rings to your OD, ID and thickness, magnetized axially, diametrically, radially or multipole.
Specifications
| Grade | N48 |
|---|---|
| Shape | Ring |
| Coating | Ni-Cu-Ni, Zn, Epoxy, Au (custom on request) |
| Tolerance | Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation. |
| Magnetization | Axial / Diametric / Radial / Multipole |
| Applications | Motor rotors and stators, encoders and position sensors, couplings and magnetic bearings |
| Lead time | Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method. |
| MOQ | Quoted per inquiry |
| Export control | Export classification is confirmed per shipment against the product composition and destination. |
What is an N48 ring magnet
N48 ring magnets are sintered NdFeB annuli with a through-bore, ground to a precise OD, ID and thickness. The ring is the natural shape when the part must mount on a shaft or let a column of flux pass through its centre, and N48 supplies enough remanence for most rotor and sensor duty without the cost of the top grades.
N48 magnetic performance
Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.
Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.
Why choose N48
N48 is the workhorse of the upper-mid range: about 10% more flux than N42 at the same size, still pressable and grindable in everyday geometries, and cheaper per part than N52 once the force target is met.
Shape, dimensional tolerance and magnetization
Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
Surface treatment
Test conditions and reports are available on request.
Coating choice follows the environment: bright Ni-Cu-Ni for indoor and clean-room work, zinc for cost-sensitive volume, and epoxy where the part is handled, exposed to salt mist or must not glare. Bare NdFeB corrodes quickly, so every ring leaves the plant coated unless the brief explicitly calls for a phosphated or as-ground finish.
Typical applications
N48 rings end up on shafts: motor rotors and stators, encoder and position-sensor poles, couplings and magnetic bearings. The bore turns the magnet into a mounting feature, which is why rings dominate rotary duty.
Handling, storage and shipping
Sintered NdFeB is hard but brittle: it chips on impact and pinches fiercely when it snaps to steel. Parts ship in padded, magnetically shielded or spaced packing with keepers where the design calls for them, and air freight follows IATA packing instruction 902 with the field at the package surface measured before dispatch.
Custom sizing, prototyping and order minimums
Every dimension, grade suffix, coating and magnetization direction is built to your drawing or reproduced from your sample. Samples and small batches come first, then volume; repeat orders are faster because the tooling and the inspection routine already exist. Minimum order quantities are quoted per inquiry against the geometry and the grade.
Grade, temperature and coating — how this part is specified
A complete specification names the grade (including the temperature suffix), the shape and dimensions with tolerances, the magnetization direction, the coating and the destination. With those five points YUECI KEJI quotes quickly; with any of them missing the project waits. Working temperature is set by the suffix, not by the shape, and the coating is set by the environment.
Designing the magnetic circuit and working on the line
A ring’s working length is its wall thickness. If torque is short, the cheapest fix is a thicker wall or a longer ring rather than a grade change; if the envelope is fixed, N50 or N52 recovers flux in the same ring. Multipole rings are quoted against the pole count, not just the geometry.
When to choose a different shape
A ring is the default for shaft-mounted duty. Move to an arc or segment when the pole must curve without a full annulus, to a disc when no bore is needed, and to a cylinder when the bore is blind.
Where this material is typically used
Sintered NdFeB rings in this grade end up in rotary machines of every size — motor rotors, encoders, couplings and magnetic bearings — wherever a magnet has to live on a shaft.
Why buyers choose it
- N48 delivers about 10% more flux than N42 at the same ring size.
- Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
- Multipole magnetization available for motor, encoder and coupling duty.
- Coatings from bright Ni-Cu-Ni to non-reflective black epoxy for optical and medical builds.
Applications
Motor rotors and stators
Encoders and position sensors
Couplings and magnetic bearings
Buyer Questions
N48 Ring Magnet FAQs
Can N48 rings be magnetized multipole?
Yes — multipole magnetisation is standard for rotor and encoder rings. Send the pole count and pitch and the fixture is built to match.
What bore tolerance can you hold on an N48 ring?
Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
Are N48 rings export Export documentation and licensing requirements are confirmed per shipment.?
Export classification is confirmed per shipment against the product composition and destination.
Request a quote for N48
You may also like



