NdFeB
N50 Ring Magnet
N50 ring magnets deliver near-top-grade flux in a shaft-mountable annulus. YUECI KEJI grinds N50 rings to your OD, ID and thickness with axial, diametric, radial or multipole magnetization.
Specifications
| Grade | N50 |
|---|---|
| Shape | Ring |
| Coating | Ni-Cu-Ni, Zn, Epoxy, Au (custom on request) |
| Tolerance | Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation. |
| Magnetization | Axial / Diametric / Radial / Multipole |
| Applications | High-torque motor rotors, precision encoders and resolvers, magnetic couplings and bearings |
| Lead time | Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method. |
| MOQ | Quoted per inquiry |
| Export control | Export classification is confirmed per shipment against the product composition and destination. |
What is an N50 ring magnet
N50 ring magnets are sintered NdFeB annuli ground to a precise OD, ID and thickness, magnetized to drawing. The grade sits just below N52 in energy product, which makes it the economical route to a high-torque ring: the flux is nearly top-grade while the material and processing stay in the mid range.
N50 magnetic performance
Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.
Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.
Why choose N50
N50 reaches an energy product band close to N52 without the top-grade cost premium and without the tighter process control that N52 demands on thin parts. It is the economical route to a high-force design.
Shape, dimensional tolerance and magnetization
Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
Surface treatment
Test conditions and reports are available on request.
Coating choice follows the environment: bright Ni-Cu-Ni for indoor and clean-room work, zinc for cost-sensitive volume, and epoxy where the part is handled, exposed to salt mist or must not glare. Bare NdFeB corrodes quickly, so every ring leaves the plant coated unless the brief explicitly calls for a phosphated or as-ground finish.
Typical applications
N50 rings end up in torque-hungry rotary duty: high-torque motor rotors, precision encoders and resolvers, magnetic couplings and bearings. The grade is chosen when the ring has to move real force without moving to N52 pricing.
Handling, storage and shipping
Sintered NdFeB is hard but brittle: it chips on impact and pinches fiercely when it snaps to steel. Parts ship in padded, magnetically shielded or spaced packing with keepers where the design calls for them, and air freight follows IATA packing instruction 902 with the field at the package surface measured before dispatch.
Custom sizing, prototyping and order minimums
Every dimension, grade suffix, coating and magnetization direction is built to your drawing or reproduced from your sample. Samples and small batches come first, then volume; repeat orders are faster because the tooling and the inspection routine already exist. Minimum order quantities are quoted per inquiry against the geometry and the grade.
Grade, temperature and coating — how this part is specified
A complete specification names the grade (including the temperature suffix), the shape and dimensions with tolerances, the magnetization direction, the coating and the destination. With those five points YUECI KEJI quotes quickly; with any of them missing the project waits. Working temperature is set by the suffix, not by the shape, and the coating is set by the environment.
Designing the magnetic circuit and working on the line
A ring’s working length is its wall thickness. If torque is short, the cheapest fix is a thicker wall or a longer ring rather than a grade change; if the envelope is fixed, N52 recovers the last few points of flux. Multipole rings are quoted against the pole count, not just the geometry.
When to choose a different shape
A ring is the default for shaft-mounted duty. Move to an arc or segment when the pole must curve without a full annulus, to a disc when no bore is needed, and to a cylinder when the bore is blind.
Where this material is typically used
Sintered NdFeB rings in this grade end up in rotary machines that carry load — traction and servo rotors, precision encoders, magnetic couplings and bearings.
Why buyers choose it
- N50 reaches an energy band close to N52 without the top-grade cost premium.
- Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
- Multipole magnetization available for motor, encoder and coupling duty.
- Coatings from bright Ni-Cu-Ni to non-reflective black epoxy for optical and medical builds.
Applications
High-torque motor rotors
Precision encoders and resolvers
Magnetic couplings and bearings
Buyer Questions
N50 Ring Magnet FAQs
Why choose N50 over N52 for a ring?
N50 sits within a few MGOe of N52 at a lower cost and with easier processing on thin walls. Choose N52 only when the force budget genuinely needs it.
Can N50 rings be supplied as multipole segments?
Yes. A ring can be supplied whole or as matched segments; matched sets are magnetized and inspected together so the pole pattern closes correctly.
Are N50 rings export Export documentation and licensing requirements are confirmed per shipment.?
Export classification is confirmed per shipment against the product composition and destination.
Request a quote for N50
You may also like



