NdFeB

N52 Cube Magnet

N52 cube magnets pack the highest NdFeB energy product into a small, symmetric shape for miniature actuators, holders and arrays. YUECI KEJI grinds all six faces square and magnetizes through any opposite pair.

N52 Cube Compact Symmetric Coated to spec
N52 Cube Magnet - YUECI KEJI

Specifications

GradeN52
ShapeCube
CoatingNi-Cu-Ni, Zn, Epoxy, Au (custom on request)
ToleranceDimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
MagnetizationThrough any opposite faces / multipole
ApplicationsMiniature actuators, Magnetic holding, Education kits
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export controlExport classification is confirmed per shipment against the product composition and destination.

What is an N52 cube magnet

N52 cube magnets are NdFeB parts with roughly equal length, width and height, ground on all six faces to a precise edge length. The cube is the most compact way to put maximum NdFeB flux into a small, symmetric package, which is why it shows up in miniature actuators, puzzles, holders and sensor targets. YUECI KEJI holds the edges square and the poles on opposite faces.

N52 magnetic performance

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

Why a cube

A cube packs the highest energy product NdFeB offers into a shape that sits flush in a pocket or grid without a preferred orientation in the plane. That symmetry simplifies fixturing and array building. N52 means the smallest cube still delivers a strong, predictable field, which matters in space-constrained actuators and teaching kits.

Shape, dimensional tolerance and magnetization

Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

Surface treatment

Test conditions and reports are available on request.

Typical applications

N52 cubes are used in miniature actuators and latches, magnetic holding and indexing, educational and demonstration kits, and as building blocks for compact magnetic arrays. Their symmetry and small size suit any job where a strong, square magnet must drop into a pocket.

Handling, storage and shipping

NdFeB is brittle and strongly magnetic. Keep cubes separated with spacers and away from cards and electronics; small cubes are easy to lose and can pinch. Air-freight packing must keep the package surface field within carrier limits; YUECI KEJI can supply declared packing on request. YUECI KEJI's quality system is aligned with IATF16949 and ISO 9001/14001/45001, with traceable lot records.

If you need a small, symmetric magnet with maximum flux, Request a quote for N52 cubes and the YUECI KEJI team will confirm edge length, magnetization and lead time.

Custom sizing, prototyping and order minimums

Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.

Grade, temperature and coating — how this part is specified

Test conditions and reports are available on request.

Designing the magnetic circuit and working on the line

Think of N52 Cube Magnet as one component in a magnetic circuit, not a standalone object. Pull force depends on the air gap, the mating steel thickness and flatness, and whether the field is allowed to close through a low-reluctance path; a small change in gap often changes hold more than a step up in grade. On the line, Sintered NdFeB is brittle, so thin discs and small cubes chip on edge and large blocks pinch — handle with spacers and never let pieces slam together. Keep parts separated with spacers, and keep them away from cards, electronics and pacemakers. The YUECI KEJI quality system is aligned with IATF16949 and ISO 9001/14001/45001, and each lot is inspected and traceable to its inspection record so you can document the part back to its production batch.

When to choose a different shape

This N52 Cube Magnet sits in a wider range of shapes made from the same material family. If your assembly needs a through-bore for a shaft or a rotating sensor, a ring or arc of the same grade may fit better; if the part must screw or clamp in place, a countersunk or assembled version removes the mounting problem; and if the envelope is fixed but the force target is not met, stepping the grade up within the family usually recovers more force than changing shape. Describe the function to YUECI KEJI and the team will propose the shape and grade together.

Where this material is typically used

In practice sintered NdFeB in this shape ends up in automotive actuators and sensors, industrial automation and robotics, consumer electronics and spindle motors, and renewable-energy and power-tool drives — anywhere a strong, compact field is needed at volume. It is the default rare-earth choice when cost per kilogram and energy product both matter.

Why buyers choose it

  • N52 gives the maximum NdFeB energy product (BH)max 49–54 MGOe in a compact cube.
  • Edges held square so cubes tile cleanly into arrays and pockets.
  • Magnetization through any opposite face, with multipole face patterns available.
  • Coating stack-ups from bright Ni-Cu-Ni to black epoxy for corrosive or optical duty.

Applications

Miniature actuators and latches

Magnetic holding and indexing

Educational and demonstration kits

Buyer Questions

N52 Cube Magnet FAQs

Can N52 cubes be magnetized on any face?

Yes. Magnetization runs through any pair of opposite faces, and multipole face patterns are available for special arrays. Tell us the pole layout you need.

What edge tolerance can you hold?

Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

Are N52 cubes export Export documentation and licensing requirements are confirmed per shipment.?

Export classification is confirmed per shipment against the product composition and destination.

Request a quote for N52