NdFeB
N52 Disc Magnet
N52 is the strongest commercial NdFeB grade, so N52 disc magnets deliver the highest flux density in a flat two-face format. YUECI KEJI presses, slices and finishes discs to your diameter and thickness, with axial, diametric or radial magnetization and full lot traceability.
Specifications
| Grade | N52 |
|---|---|
| Shape | Disc |
| Coating | Ni-Cu-Ni, Zn, Epoxy, Au (custom on request) |
| Tolerance | Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation. |
| Magnetization | Axial / Diametric / Radial |
| Applications | Sensors and transducers, Voice-coil and speaker motors, Spacers and couplings |
| Lead time | Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method. |
| MOQ | Quoted per inquiry |
| Export control | Export classification is confirmed per shipment against the product composition and destination. |
What is an N52 disc magnet
An N52 disc magnet is a flat, cylindrical neodymium part pressed and sintered from NdFeB powder, then ground to a precise diameter and thickness. The disc format, two large parallel faces and a short axial length, makes it the workhorse shape for stacking, holding and flux-target jobs where the field is wanted through the flat face. YUECI KEJI presses, slices and finishes N52 discs to your diameter and thickness with full lot traceability.
N52 magnetic performance
Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.
Why N52 over a lower grade
Against N42 or N35, N52 gives more pull per gram and per cubic centimetre, so it is the choice when the envelope is fixed but the force target is high. The trade is cost per kilogram and slightly harder sintering on thin discs; for many sensor, voice-coil and coupling jobs the performance gain is worth it.
Shape, tolerance and magnetization
Discs are ground to plus or minus 1 percent with a tight plus or minus 0.05 mm option for sensor and voice-coil stacks. Magnetization is axial through the face, diametric across the diameter, or radial for rotary sensing, cut to your drawing and marked so assembly is unambiguous.
Surface treatment
Test conditions and reports are available on request.
Typical applications
N52 discs appear in precision sensors, transducers and Hall-effect targets, speaker voice coils, earpiece motors and micro-actuators, and as spacers, couplings and thin-film deposition fixtures.
Handling, storage and shipping
Sintered NdFeB is brittle and strongly magnetic, keep discs separated with spacers, away from cards and electronics. The YUECI KEJI quality system is aligned with IATF16949 and ISO 9001/14001/45001, and lots carry traceable inspection records. For air freight, low-field declared packing is available on request.
If your drawing calls for a specific diameter, thickness or magnetization direction, Request a quote and the YUECI KEJI engineering team will confirm feasibility, coating and lead time.
Why buyers choose it
- N52 grade gives the maximum remanence of the NdFeB range — more holding force per gram than N42 or N35.
- Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
- Magnetization to drawing: axial through the face, diametric across the diameter, or radial for rotary sensing.
- Coatings: bright Ni-Cu-Ni, zinc, or non-reflective black epoxy for optical and medical builds.
Applications
Precision sensors, transducers and Hall-effect targets
Speaker voice coils, earpiece motors and micro-actuators
Spacers, couplings and thin-film deposition fixtures
Buyer Questions
N52 Disc Magnet FAQs
Which magnetization direction should a disc use?
Axial (through the flat faces) is standard for holding and stacks; diametric or radial is specified when the field must sit across or around the disc — tell us the sensing or torque direction and we orient it.
Can you hold a tight thickness tolerance?
Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
Do these discs require export licenses?
Export classification is confirmed per shipment against the product composition and destination.
Request a quote for N52
You may also like


