NdFeB

N52 Neodymium Rod Magnet

N52 neodymium rod magnets are the highest commercial-energy cylindrical NdFeB sections, for applications that need the most flux density per volume. YUECI KEJI grinds N52 rods to your diameter and length, nickel-plated.

N52 Rod / cylinder Axial magnetization Maximum energy product Nickel plated
N52 Neodymium Rod Magnet - YUECI KEJI

Specifications

GradeN52 (80 °C)
ShapeRod / cylinder
CoatingNickel
ToleranceDimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
MagnetizationAxial along the length
ApplicationsHigh-flux sensors, compact actuators, dense rotor stacks
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export controlExport classification is confirmed per shipment against the product composition and destination.

What an N52 neodymium rod magnet is

An N52 neodymium rod magnet is a cylindrical sintered NdFeB section at the top of the commercial energy-product range. For a given volume it carries more flux density than a lower grade, which is why the N52 rod is the choice when space is tight and the field has to be as strong as possible. YUECI KEJI grinds N52 rods to your diameter and length.

N52 performance

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

Shape, tolerance and magnetization

The rod is a round section with poles on the ends, ground to your diameter and length to a tolerance quoted per drawing. Magnetization is axial along the length as standard, or diametric for side-acting sensor duty; send the direction and it is confirmed before the first lot.

Surface treatment

Nickel plating is standard for corrosion resistance in sensor and instrument builds. Other finishes are quoted per request and confirmed against your specification.

Handling and storage

Sintered NdFeB is brittle and strongly magnetic. Rods are packed separated and kept away from cards, drives and pacemakers. Store dry, away from acid, alkali and high humidity to prevent rust.

Why buyers choose it

  • N52 gives the highest energy product of the commercial NdFeB range.
  • Most flux density per volume for compact, high-power builds.
  • Ground to your diameter and length, axial as standard.
  • Nickel plating for corrosion resistance in instruments.

Applications

High-flux sensors and reed-switch targets

Compact linear actuators and solenoids

Dense motor rotor stacks

Miniature probes and instrument cores

Maker, research and prototyping builds

Buyer Questions

N52 Neodymium Rod Magnet FAQs

Why choose N52 over another grade?

N52 has the highest energy product of the commercial NdFeB range, so for a given volume it delivers the most flux density. Choose it when space is tight and you need maximum field, accepting its standard 80 °C operating limit.

What lengths can you supply?

Everyday rods run from a few millimetres to around 100 mm in one piece; longer sections are quoted per inquiry and can be built up from stacked rods where the design allows.

Can it be magnetized diametrically?

Yes. Diametric magnetization puts the poles on opposite sides of the cylindrical surface for side-acting sensor duty; send the sensing direction and we orient it to drawing.

Are N52 rods export Export documentation and licensing requirements are confirmed per shipment.?

Export classification is confirmed per shipment against the product composition and destination.

Can rods be cut to length on site?

Not safely. Sintered NdFeB is brittle and will crack if sawn or sheared; lengths must be finished by the supplier. Specify the length you need rather than planning to cut later.

Request a quote for N52 NdFeB Rod