NdFeB
N52 Cylinder Magnet
N52 cylinder magnets are rod-shaped NdFeB parts for plungers, actuators and linear sensors that ride in a bored housing. YUECI KEJI centreless-grinds the diameter true and cuts axial or radial magnetization to drawing.
Specifications
| Grade | N52 |
|---|---|
| Shape | Cylinder |
| Coating | Ni-Cu-Ni, Zn, Epoxy, Au (custom on request) |
| Tolerance | Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation. |
| Magnetization | Axial / Radial |
| Applications | Sensor plungers, Linear position sensors, Guide pins and detents |
| Lead time | Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method. |
| MOQ | Quoted per inquiry |
| Export control | Export classification is confirmed per shipment against the product composition and destination. |
What is an N52 cylinder magnet
N52 cylinder magnets are rod-shaped NdFeB parts with a circular cross-section and a length greater than the diameter. They are pressed and sintered as a blank then centreless-ground to a uniform diameter and cut to length. The cylinder suits push-pins, plungers, linear sensors and any build where a round bar of magnet sits in a bored housing. YUECI KEJI holds the diameter concentric along the length so the rod runs true.
N52 magnetic performance
Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.
Why a cylinder
A cylinder is essentially a long disc, so it keeps the top energy product of N52 while fitting a round bore instead of a flat pocket. That makes it ideal for plungers, actuators and sensor targets that move along an axis. N52 gives the maximum flux for a given rod diameter, which helps where the housing fixes the diameter and the stroke needs force.
Shape, dimensional tolerance and magnetization
Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
Surface treatment
Test conditions and reports are available on request.
Typical applications
N52 cylinders are used as sensor plungers and actuators, in linear position sensors and Hall targets, and as guide pins and magnetic detents in mechanisms. Their round section lets them slide in bores where a block would bind.
Handling, storage and shipping
NdFeB is brittle and strongly magnetic. Keep cylinders separated and away from cards and electronics; long rods can snap together edge-on. Air-freight packing must keep the package surface field within carrier limits; YUECI KEJI can supply declared packing on request. YUECI KEJI's quality system is aligned with IATF16949 and ISO 9001/14001/45001, with traceable lot records.
If your mechanism needs a round magnet that slides or senses along an axis, Request a quote for N52 cylinders and the YUECI KEJI team will confirm diameter, length, magnetization and lead time.
Custom sizing, prototyping and order minimums
Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
Grade, temperature and coating — how this part is specified
Test conditions and reports are available on request.
Designing the magnetic circuit and working on the line
Think of N52 Cylinder Magnet as one component in a magnetic circuit, not a standalone object. Pull force depends on the air gap, the mating steel thickness and flatness, and whether the field is allowed to close through a low-reluctance path; a small change in gap often changes hold more than a step up in grade. On the line, Sintered NdFeB is brittle, so thin discs and small cubes chip on edge and large blocks pinch — handle with spacers and never let pieces slam together. Keep parts separated with spacers, and keep them away from cards, electronics and pacemakers. The YUECI KEJI quality system is aligned with IATF16949 and ISO 9001/14001/45001, and each lot is inspected and traceable to its inspection record so you can document the part back to its production batch.
When to choose a different shape
This N52 Cylinder Magnet sits in a wider range of shapes made from the same material family. If your assembly needs a through-bore for a shaft or a rotating sensor, a ring or arc of the same grade may fit better; if the part must screw or clamp in place, a countersunk or assembled version removes the mounting problem; and if the envelope is fixed but the force target is not met, stepping the grade up within the family usually recovers more force than changing shape. Describe the function to YUECI KEJI and the team will propose the shape and grade together.
Where this material is typically used
In practice sintered NdFeB in this shape ends up in automotive actuators and sensors, industrial automation and robotics, consumer electronics and spindle motors, and renewable-energy and power-tool drives — anywhere a strong, compact field is needed at volume. It is the default rare-earth choice when cost per kilogram and energy product both matter.
Why buyers choose it
- N52 gives the maximum NdFeB energy product (BH)max 49–54 MGOe in a rod form.
- Diameter held concentric along the length so the rod slides true in its bore.
- Magnetization axial for plungers or radial for rotary sensing.
- Coating stack-ups from bright Ni-Cu-Ni to black epoxy for corrosive or optical duty.
Applications
Sensor plungers and linear actuators
Linear position sensors and Hall targets
Guide pins and magnetic detents in mechanisms
Buyer Questions
N52 Cylinder Magnet FAQs
How is a cylinder magnetized?
Axial along the length is the usual choice for plungers and sensors; radial magnetization is cut when the field must wrap the rod for rotary sensing. Tell us the stroke or sensing direction.
What diameter tolerance can you hold?
Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
Are N52 cylinders export Export documentation and licensing requirements are confirmed per shipment.?
Export classification is confirmed per shipment against the product composition and destination.
Request a quote for N52
You may also like


