NdFeB
N52 Arc, Ring & Disc Magnet
N52 ring and arc magnets are the rotary-workhorse shapes for motors and generators. YUECI KEJI presses annular and segmented rings to your bore, OD and chord, with radial magnetization for clean rotary fields.
Specifications
| Grade | N52 |
|---|---|
| Shape | Arc/Segment |
| Coating | Ni-Cu-Ni, Zn, Epoxy, Au (custom on request) |
| Tolerance | Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation. |
| Magnetization | Radial / Multi-pole radial |
| Applications | Motors and generators, Servo and spindle rotors, Couplings and clutches |
| Lead time | Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method. |
| MOQ | Quoted per inquiry |
| Export control | Export classification is confirmed per shipment against the product composition and destination. |
What is an N52 ring, arc and disc magnet set
N52 ring and arc magnets are the rotary-workhorse shapes for motors and generators. A ring is an annular part; an arc, or segment, is a curved slice that assembles into a larger ring where one-piece pressing is impractical. YUECI KEJI presses annular and segmented rings to your bore, OD and chord, with radial magnetization for clean rotary fields.
N52 magnetic performance
Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.
Radial magnetization for rotary fields
For motor and encoder rotors the field must point outward from the bore, radial magnetization, rather than through the face. YUECI KEJI magnetizes rings and arcs radially, and can lay out multi-pole radial patterns for servo and spindle-motor rotors. Arc segments assemble into large rings where a single pressing is not practical, with chord and angle held so the air gap stays uniform.
Dimensional tolerance
Rings and arcs are ground to plus or minus 1 percent with a tight plus or minus 0.05 mm option on chord, angle and radius. Uniform chord and angle are what let segments seat gapless into the rotor or stator stack, so YUECI KEJI controls those dimensions tightly.
Surface treatment
Test conditions and reports are available on request.
Typical applications
N52 rings and arcs are used in permanent-magnet motors and generators, servo and spindle-motor rotors, and couplings, clutches and magnetic assemblies.
Handling, storage and shipping
Thin arcs and rings chip on edges, handle with spacers and protect the curve. The YUECI KEJI quality system is aligned with IATF16949 and ISO 9001/14001/45001, and lots are traceable. Low-field declared packing for air freight is available on request.
To specify a ring or arc by bore, OD, chord and pole count, Request a quote and the YUECI KEJI team will confirm magnetization layout and lead time.
Why buyers choose it
- Radial magnetization available for encoder, servo and spindle-motor rotors.
- Arc segments assemble into large rings where one-piece pressing is not practical.
- N52 grade sustains high flux in compact rotor packs.
- Ground chord and angle tolerances held for tight air gaps.
Applications
Permanent-magnet motors and generators
Servo and spindle-motor rotors
Couplings, clutches and magnetic assemblies
Buyer Questions
N52 Arc, Ring & Disc Magnet FAQs
Ring or segmented arc — which should I specify?
One-piece rings suit smaller bores; for large OD or high pole counts we supply arc segments that you or we assemble into the full ring. Tell us the air gap and pole count.
Can you magnetize radially?
Yes — radial magnetization is standard for rings used in rotary sensing and motors; we also do multi-pole radial patterns.
Export licensing?
Export classification is confirmed per shipment against the product composition and destination.
Request a quote for N52
You may also like



