NdFeB

N48 Cylinder Magnet

N48 cylinder magnets are stout round sections with poles on the ends, for sensors and actuators that need more working length than a disc. YUECI KEJI grinds them to your diameter and length.

N48 Cylinder Axial / Diametric / Radial Custom size Coated to spec
N48 Cylinder Magnet - YUECI KEJI

Specifications

GradeN48
ShapeCylinder
CoatingNi-Cu-Ni, Zn, Epoxy, Au (custom on request)
ToleranceDimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
MagnetizationAxial / Diametric / Radial
ApplicationsDepth and position sensors, actuators and solenoid cores, couplings and shaft targets
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export controlExport classification is confirmed per shipment against the product composition and destination.

What an N48 cylinder magnet is

An N48 cylinder is a sintered NdFeB rod with poles on its two flat ends, one band below N50 in energy product. The cylinder is the shape you reach for when you need a compact axial field and a clean round profile for press-fit or potting.

At YUECI KEJI N48 cylinders are sintered, machined to length and diameter, coated, then magnetised axially through the ends. Diameter, length, grade and coating are all built to drawing.

Why N48 is the cost-balanced choice

N48 gives up a little flux to N50 but is noticeably cheaper to sinter in volume, so it is the grade you pick when the design has headroom and the bill of materials is the constraint. In a large-run motor or speaker where thousands of parts ship, the N48-to-N50 material saving compounds fast without a measurable performance loss at the system level.

Shape, tolerance and magnetisation

Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

N48-specific applications

N48 cylinders go where volume cost rules: BLDC and PMSM motor rotors, speaker and transducer motors, magnetic holders and catches, and couplings where the torque envelope has design headroom. When the part count is high and the field need is met, N48 is the default.

Handling, storage and shipping

NdFeB is hard but brittle and strongly magnetic, so cylinders ship in magnetically separated, padded packing with pole pieces kept apart. Keep them dry or rely on the coating; like all NdFeB, N48 is more temperature-sensitive than ferrite.

Custom sizes, grades and order minimums

Every diameter, length, grade and coating is built to your drawing or reproduced from a sample. Prototype quantities are supported and repeat orders are faster once tooling exists.

Specifying an N48 cylinder order

A complete specification names the grade (N48), the diameter and length, the magnetisation direction, the coating, the working temperature and the quantity. The exact temperature coefficient and grade window are confirmed on request.

Designing the magnetic circuit at N48

At N48 the circuit usually has headroom, so the cheap win is often a slightly larger diameter or longer stroke rather than jumping to N50. Keep the air gap tight and the return path in low-reluctance iron; the grade rarely becomes the limiting factor in a cost-optimised design.

When an N48 cylinder is the wrong shape

A cylinder is the default for axial end-pole duty with a round profile. Move to a block for a rectangular face, to a ring for a through-bore, and to ferrite when temperature or price beats flux density.

Where N48 cylinders are typically used

They end up in BLDC rotors, speakers, holders and couplings — the high-volume, cost-balanced work where N48's price edge matters more than the last few percent of flux.

Why buyers choose it

  • N48 delivers about 10% more flux than N42 at the same cylinder size.
  • Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
  • Axial, diametric or radial magnetization cut to drawing for sensing duty.
  • Coatings from bright Ni-Cu-Ni to non-reflective black epoxy for optical and medical builds.

Applications

Depth and position sensors

Actuators and solenoid cores

Couplings and shaft targets

Buyer Questions

N48 Cylinder Magnet FAQs

When should I choose a cylinder over a disc?

When the part needs working length: a cylinder carries more magnet volume and more force than a disc of the same diameter, at the cost of height.

Can N48 cylinders be magnetized diametrically?

Yes. Diametric magnetization puts the poles on opposite sides of the cylindrical surface for side-acting sensor duty.

Are N48 cylinders export Export documentation and licensing requirements are confirmed per shipment.?

Export classification is confirmed per shipment against the product composition and destination.

Request a quote for N48