NdFeB
N35 Ring Magnet
N35 ring magnets are the lowest-cost sintered NdFeB grade in annular form, with a concentric through-bore for shafts and rotary assemblies. YUECI KEJI grinds the bore true to the OD and cuts magnetization to drawing.
Specifications
| Grade | N35 |
|---|---|
| Shape | Ring |
| Coating | Ni-Cu-Ni, Zn, Epoxy, Au (custom on request) |
| Tolerance | Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation. |
| Magnetization | Axial / Diametric / Radial / Multipole |
| Applications | Low-duty couplings, Craft and education, Latches and indexing |
| Lead time | Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method. |
| MOQ | Quoted per inquiry |
| Export control | Export classification is confirmed per shipment against the product composition and destination. |
What is an N35 ring magnet
N35 ring magnets are the entry grade of sintered NdFeB in annular form, with a through-bore for shafts, bolts and rotary assemblies. N35 trades some energy product for the lowest material cost in the NdFeB family, which is why it is common in high-volume, cost-driven rings where the field requirement is modest. YUECI KEJI grinds the bore concentric to the OD and cuts magnetization to drawing.
N35 magnetic performance
Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.
When N35 is the right ring grade
If a ring only needs to hold, index or sense with a modest field, paying for N48 or N52 adds cost without benefit. N35 is the economical choice for large runs of couplings, latches, craft and educational rings, and for any assembly where the magnet is one of many low-duty parts. Where the bore must be precise and the field merely adequate, N35 is hard to beat on price.
Shape, dimensional tolerance and magnetization
Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
Surface treatment
Test conditions and reports are available on request.
Typical applications
N35 rings are used in low-duty magnetic couplings and clutches, craft and educational kits, latches and indexing features, and as slip-on holding rings on non-critical shafts. The through-bore is the feature that makes them useful wherever something turns or passes through.
Handling, storage and shipping
NdFeB is brittle and strongly magnetic. Keep rings separated and away from cards and electronics, and avoid stacking them on a common shaft where they can snap together. Air-freight packing must keep the package surface field within carrier limits; YUECI KEJI can supply declared packing on request. YUECI KEJI's quality system is aligned with IATF16949 and ISO 9001/14001/45001, with traceable lot records.
If a ring only needs a modest field at the lowest cost, Request a quote for N35 rings and the YUECI KEJI team will confirm dimensions, magnetization and lead time.
Custom sizing, prototyping and order minimums
Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
Grade, temperature and coating — how this part is specified
Test conditions and reports are available on request.
Designing the magnetic circuit and working on the line
Think of N35 Ring Magnet as one component in a magnetic circuit, not a standalone object. Pull force depends on the air gap, the mating steel thickness and flatness, and whether the field is allowed to close through a low-reluctance path; a small change in gap often changes hold more than a step up in grade. On the line, Sintered NdFeB is brittle, so thin discs and small cubes chip on edge and large blocks pinch — handle with spacers and never let pieces slam together. Keep parts separated with spacers, and keep them away from cards, electronics and pacemakers. The YUECI KEJI quality system is aligned with IATF16949 and ISO 9001/14001/45001, and each lot is inspected and traceable to its inspection record so you can document the part back to its production batch.
When to choose a different shape
This N35 Ring Magnet sits in a wider range of shapes made from the same material family. If your assembly needs a through-bore for a shaft or a rotating sensor, a ring or arc of the same grade may fit better; if the part must screw or clamp in place, a countersunk or assembled version removes the mounting problem; and if the envelope is fixed but the force target is not met, stepping the grade up within the family usually recovers more force than changing shape. Describe the function to YUECI KEJI and the team will propose the shape and grade together.
Where this material is typically used
In practice sintered NdFeB in this shape ends up in automotive actuators and sensors, industrial automation and robotics, consumer electronics and spindle motors, and renewable-energy and power-tool drives — anywhere a strong, compact field is needed at volume. It is the default rare-earth choice when cost per kilogram and energy product both matter.
Why buyers choose it
- N35 is the most economical NdFeB grade for high-volume, low-duty rings.
- Bore held concentric to the OD so the ring seats true on shafts.
- Magnetization to drawing: axial, diametric, radial or multipole.
- Coating stack-ups from bright Ni-Cu-Ni to black epoxy for corrosive or optical duty.
Applications
Low-duty magnetic couplings and clutches
Craft, hobby and educational magnet kits
Latches, indexing and slip-on holding rings
Buyer Questions
N35 Ring Magnet FAQs
Is N35 strong enough for a ring?
For low-duty holding, indexing and sensing where the field requirement is modest, N35 is adequate and the most economical NdFeB grade. If the force target is tight, step up to N42 or N48.
Can N35 rings be magnetized multipole?
Yes. Axial, diametric, radial and multipole magnetization around the circumference are all cut to drawing for encoder and sensor rings.
Are N35 rings export Export documentation and licensing requirements are confirmed per shipment.?
Export classification is confirmed per shipment against the product composition and destination.
Request a quote for N35
You may also like



