NdFeB

N35 Segment Magnet

N35 segment magnets are the lowest-cost curved pieces for high-volume rotor builds. YUECI KEJI grinds N35 segments to your radii, angle and thickness with radial, tangential or multipole magnetization.

N35 Arc / segment Radial / Tangential / Multipole Matched sets Coated to spec
N35 Segment Magnet - YUECI KEJI

Specifications

GradeN35
ShapeArc / segment
CoatingNi-Cu-Ni, Zn, Epoxy, Au (custom on request)
ToleranceDimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
MagnetizationRadial / Tangential / Multipole
ApplicationsHigh-volume motor rotors, toy and small-appliance drives, couplings and curved assemblies
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export controlExport classification is confirmed per shipment against the product composition and destination.

What is an N35 segment magnet

N35 segment magnets are curved sintered NdFeB pieces that nest into pole rings. The segment format is the standard way to build a multipole rotor, and N35 is the entry grade of the range: the cheapest material for rotors whose envelope can absorb the lower flux.

N35 magnetic performance

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

Why choose N35

N35 is the entry grade of the commercial range. It gives up energy product against N42 and above, and in exchange it is the easiest grade to press and grind in thin or awkward geometries and the cheapest per kilogram. It suits high-volume, low-duty work where the envelope is generous and the budget is not.

Shape, dimensional tolerance and magnetization

Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

Surface treatment

Test conditions and reports are available on request.

Coating choice follows the environment: bright Ni-Cu-Ni for indoor and clean-room work, zinc for cost-sensitive volume, and epoxy where the part is handled, exposed to salt mist or must not glare. Bare NdFeB corrodes quickly, so every segment leaves the plant coated unless the brief explicitly calls for a phosphated or as-ground finish.

Typical applications

N35 segments end up in high-volume rotary machines: appliance and toy motors, fan and pump drives, and couplings where the torque target is modest and the piece price is not.

Handling, storage and shipping

Sintered NdFeB is hard but brittle: it chips on impact and pinches fiercely when it snaps to steel. Parts ship in padded, magnetically shielded or spaced packing with keepers where the design calls for them, and air freight follows IATA packing instruction 902 with the field at the package surface measured before dispatch.

Custom sizing, prototyping and order minimums

Every dimension, grade suffix, coating and magnetization direction is built to your drawing or reproduced from your sample. Samples and small batches come first, then volume; repeat orders are faster because the tooling and the inspection routine already exist. Minimum order quantities are quoted per inquiry against the geometry and the grade.

Grade, temperature and coating — how this part is specified

A complete specification names the grade (including the temperature suffix), the shape and dimensions with tolerances, the magnetization direction, the coating and the destination. With those five points YUECI KEJI quotes quickly; with any of them missing the project waits. Working temperature is set by the suffix, not by the shape, and the coating is set by the environment.

Designing the magnetic circuit and working on the line

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

When to choose a different shape

A segment is the default for curved pole work. Move to a full ring when the annulus is continuous, to a block when the pole face is flat, and to a tile when the segment is a simple curved slab.

Where this material is typically used

Sintered NdFeB segments in this grade end up in the high-volume end of the rotary market — appliance, toy and fan motors, and light coupling duty.

Why buyers choose it

  • N35 is the most economical commercial NdFeB grade for high-volume segment builds.
  • Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
  • Radial, tangential or multipole magnetization cut to drawing for rotor duty.
  • Coatings from bright Ni-Cu-Ni to non-reflective black epoxy for optical and medical builds.

Applications

High-volume motor rotors

Toy and small-appliance drives

Couplings and curved assemblies

Buyer Questions

N35 Segment Magnet FAQs

When is N35 the right segment grade?

When the rotor envelope is generous and the volume is high. N35 gives up flux against N42, and in exchange it is the cheapest material on the program.

Can matched segment sets be supplied?

Yes. Segments for one rotor are ground, magnetized and inspected as a set so the pole pattern closes correctly around the ring.

Are N35 segments export Export documentation and licensing requirements are confirmed per shipment.?

Export classification is confirmed per shipment against the product composition and destination.

Request a quote for N35