NdFeB

N38SH Arc Magnet

N38SH Arc Magnet is supplied to your approved drawing; grades, coatings, magnetization direction and dimensional tolerances are confirmed at quotation.

N38SH Arc / segment Radial / Tangential / Multipole Export licence managed
N38SH Arc Magnet - YUECI KEJI

Specifications

GradeN38SH
ShapeArc / segment
CoatingNi-Cu-Ni, Zn, Epoxy, Au (custom on request)
ToleranceDimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
MagnetizationRadial / Tangential / Multipole
ApplicationsHot-duty motor rotors and generators, automotive traction and auxiliary drives, high-temperature couplings
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export controlExport classification is confirmed per shipment against the product composition and destination.

What is an N38SH arc magnet

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

N38SH magnetic performance

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

Why choose N38SH for hot duty

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

Shape, dimensional tolerance and magnetization

Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

Surface treatment

Test conditions and reports are available on request.

Coating choice follows the environment: bright Ni-Cu-Ni for indoor and clean-room work, zinc for cost-sensitive volume, and epoxy where the part is handled, exposed to salt mist or must not glare. Bare NdFeB corrodes quickly, so every arc leaves the plant coated unless the brief explicitly calls for a phosphated or as-ground finish.

Typical applications

N38SH arcs end up in hot rotary machines: traction and auxiliary motor rotors, hot-zone generators and high-temperature couplings. The segment format lets the designer place flux around the rotor without magnetizing a full annulus.

Handling, storage and shipping

Sintered NdFeB is hard but brittle: it chips on impact and pinches fiercely when it snaps to steel. Parts ship in padded, magnetically shielded or spaced packing with keepers where the design calls for them, and air freight follows IATA packing instruction 902 with the field at the package surface measured before dispatch.

Custom sizing, prototyping and order minimums

Every dimension, grade suffix, coating and magnetization direction is built to your drawing or reproduced from your sample. Samples and small batches come first, then volume; repeat orders are faster because the tooling and the inspection routine already exist. Minimum order quantities are quoted per inquiry against the geometry and the grade.

Grade, temperature and coating — how this part is specified

A complete specification names the grade (including the temperature suffix), the shape and dimensions with tolerances, the magnetization direction, the coating and the destination. With those five points YUECI KEJI quotes quickly; with any of them missing the project waits. Working temperature is set by the suffix, not by the shape, and the coating is set by the environment.

Designing the magnetic circuit and working on the line

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

When to choose a different shape

An arc is the default for curved pole work. Move to a full ring when the annulus is continuous, to a block when the pole face is flat, and to a tile when the segment is a simple curved slab.

Where this material is typically used

Sintered NdFeB arcs in this grade end up in motors and generators that run hot — traction drives, auxiliary automotive machines and industrial hot-zone rotors.

Why buyers choose it

  • N38SH Arc Magnet — built to your approved drawing, with grades, coatings and tolerances confirmed at quotation.
  • Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
  • Radial, tangential or multipole magnetization cut to drawing for rotor duty.
  • Coatings from bright Ni-Cu-Ni to non-reflective black epoxy for optical and medical builds.

Applications

Hot-duty motor rotors and generators

Automotive traction and auxiliary drives

High-temperature couplings

Buyer Questions

N38SH Arc Magnet FAQs

Why choose N38SH for a hot motor?

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

Is N38SH export Export documentation and licensing requirements are confirmed per shipment.?

Export classification is confirmed per shipment against the product composition and destination.

Can matched segment sets be supplied?

Yes. Segments for one rotor are ground, magnetized and inspected as a set so the pole pattern closes correctly around the ring.

Request a quote for N38SH