Ferrite

Ferrite Disc Magnet

Ferrite disc magnets are low-cost ceramic permanent magnets that resist corrosion without plating. YUECI KEJI presses and magnetizes ferrite discs to drawing for speakers, motors, catches and holding.

Ferrite Disc Ceramic Corrosion-resistant Low cost
Ferrite Disc Magnet - YUECI KEJI

Applications

Loudspeakers and small motors

Magnetic catches, latches and holding

Separation and conveying equipment

Why buyers choose it

  • Ferrite is the lowest-cost permanent magnet family per unit.
  • Naturally corrosion resistant — no plating required to survive humid air.
  • Stable supply and pricing compared with rare-earth magnets.
  • Pressed to shape, so large or thin discs are practical.

Specifications

GradeHard ferrite (ceramic)
ShapeDisc
CoatingAs-pressed / painted / epoxy on request
ToleranceDimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
MagnetizationAxial through the faces
ApplicationsLoudspeakers, Small motors, Magnetic catches
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export controlExport classification is confirmed per shipment against the product composition and destination.

What a ferrite disc magnet is

A ferrite disc magnet is a flat circular ceramic pressed from strontium or barium ferrite powder, with two large pole faces. The disc is the default shape for speakers, sensors and rotary builds because it is cheap to press, needs no plating, and presents a clean axial field through its faces. YUECI KEJI presses discs to your drawing and grades each lot.

Geometry and dimensional control

A disc is specified as diameter × thickness. YUECI KEJI holds each dimension to a standard commercial tolerance, with tighter options for fitted assemblies, and grinds the faces parallel so the field stays uniform. Because ferrite is pressed rather than machined, very thin discs and large diameters are both practical.

Magnetization through the faces

Axial magnetization — north and south on the two flat faces — is standard for discs and gives a predictable field for sensors and speakers. Diametric or radial magnetization is available on request for special encoder or coupling builds, and YUECI KEJI marks the pole orientation so the disc drops in the right way round.

Why ferrite discs for high volume

Ferrite is the lowest-cost permanent-magnet family and resists corrosion with no plating, which is why it is the default in loudspeakers, small motors, magnetic catches, holding and signage. The disc form lets designers place magnets generously without blowing the bill of materials.

Handling and storage

Flat ferrite discs are brittle ceramics that chip if dropped or over-clamped, but they will not rust and their weaker field is safer to handle than neodymium. Store dry, away from strong demagnetizing fields; air-freight packing is simple because the surface field is low. YUECI KEJI works to a quality system aligned with IATF16949 and ISO 9001/14001/45001, with traceable lot records.

If your product needs a low-cost flat magnet, Request a quote for ferrite disc and the YUECI KEJI team will confirm dimensions, grade and magnetization.

Buyer Questions

Ferrite Disc Magnet FAQs

Do ferrite discs need plating?

No. Hard ferrite resists corrosion intrinsically, so most discs ship as-pressed or with a painted or epoxy coat for appearance. We can add Ni-Cu-Ni, zinc or epoxy on request.

How strong is a ferrite disc compared with neodymium?

Ferrite has a much lower energy product than neodymium, so for the same size it holds less. The payoff is a far lower cost per unit and built-in corrosion resistance, which is why it dominates high-volume jobs.

Are ferrite discs export Export documentation and licensing requirements are confirmed per shipment.?

Export classification is confirmed per shipment against the product composition and destination.

Request a quote for Ferrite