Ferrite

Ferrite Block Magnet

Ferrite block magnets are low-cost ceramic rectangles with large flat poles for holding, fixtures and arrays. YUECI KEJI presses and magnetizes ferrite blocks to drawing with no plating needed.

Ferrite Block Ceramic Flat poles Low cost
Ferrite Block Magnet - YUECI KEJI

Applications

Magnetic catches, latches and closures

Holding fixtures and whiteboard mounts

Magnetic arrays and signage

Why buyers choose it

  • Ferrite is the lowest-cost permanent magnet family per unit.
  • Large flat poles give a clean field for holding and lifting.
  • Naturally corrosion resistant — no plating required.
  • Pressed to shape, so large blocks are practical.

Specifications

GradeHard ferrite (ceramic)
ShapeBlock
CoatingAs-pressed / painted / epoxy on request
ToleranceDimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
MagnetizationThrough any face
ApplicationsMagnetic catches, Holding fixtures, Whiteboard mounts
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export controlExport classification is confirmed per shipment against the product composition and destination.

What a ferrite block magnet is

A ferrite block magnet is a rectangular ceramic pressed from strontium or barium ferrite powder, with two large flat faces that carry the poles. The block is the most versatile ferrite shape: it stacks into arrays, bolts behind a steel plate, or drops into a machined pocket, so it is the general-purpose choice for holding, latches and low-cost motor field pieces. YUECI KEJI presses blocks to your drawing and grades each lot.

Geometry and dimensional control

A block is defined by length, width and thickness. YUECI KEJI holds each dimension to a standard commercial tolerance, with tighter options for fitted assemblies, and can chamfer edges because sintered ferrite chips at a sharp corner. For multi-magnet arrays we hold the stack height so the field stays uniform part to part.

Magnetization through any face

Magnetization is cut to your drawing — through the thickness, across the width, radially or as a multipole pattern on one face — and YUECI KEJI marks the pole layout so assembly is unambiguous. Blocks can be magnetized after they are fixed in a housing if that suits your process.

Why ferrite blocks

Ferrite is the lowest-cost permanent-magnet family and needs no plating to resist corrosion, which is why it is the default for magnetic catches, holding, signage, separation and conveying as well as cost-first motors. The rectangular form lets designers place flux where a flat steel face meets it.

Handling and storage

Rectangular ferrite blocks are brittle ceramics that chip if dropped or over-clamped, but they will not rust and their weaker field is safer to handle than neodymium. Store dry, away from strong demagnetizing fields; air-freight packing is simple because the surface field is low. YUECI KEJI works to a quality system aligned with IATF16949 and ISO 9001/14001/45001, with traceable lot records.

If your assembly needs a low-cost flat magnet, Request a quote for ferrite block and the YUECI KEJI team will confirm dimensions, grade and magnetization.

Buyer Questions

Ferrite Block Magnet FAQs

Can ferrite blocks be magnetized through any face?

Yes. Magnetization is cut through any pair of opposite faces to drawing, and we mark the pole faces for assembly.

Do ferrite blocks rust?

No. Hard ferrite is intrinsically corrosion resistant, so blocks do not need plating to survive humid air. A painted or epoxy coat is optional for appearance or bonding.

Are ferrite blocks export Export documentation and licensing requirements are confirmed per shipment.?

Export classification is confirmed per shipment against the product composition and destination.

Request a quote for Ferrite