Qualifying a magnet supplier is a verification exercise, and the thing being verified is whether the numbers on an inspection report correspond to anything real. A supplier who measures properly can be trusted with a tolerance; a supplier who guesses cannot, however good the price. This checklist covers the eight areas worth checking, whether in person or remotely.
1. Raw material control
Ask where the magnet powder comes from and how grade is verified on receipt. A supplier who knows their feedstock suppliers and can show incoming grade certificates is controlling the single largest variable in the product. A supplier who cannot tell you where their NdFeB powder comes from is passing that risk to you.
2. Process capability
Pressing, sintering, grinding and magnetizing each have capability limits. Ask what tolerances the process holds as standard, what it holds with extra effort, and what it cannot hold at all. A supplier who answers with specific numbers and honest limits is more useful than one who says yes to everything.
3. Inspection instruments and calibration
This is the heart of the audit. Ask to see the instruments: the hysteresisgraph for magnetic values, the fluxmeter for production flux, the gaussmeter for surface field, the coating thickness gauge and the dimensional equipment. Then ask for the calibration records, with intervals and certificates. An uncalibrated instrument produces numbers that cannot be defended, and a supplier who does not calibrate is guessing in a measurable way.
4. Lot traceability
Ask how a delivered part can be traced back to its production lot, and what the lot record contains. The answer should include the measured dimensions, the flux or field values, the coating data and the grade, all against your part number. Traceability is what makes a re-order reproduce the original, and what turns a field complaint into a comparison.
5. Change control
Ask what happens when the feedstock lot, the tooling, the coating line or a furnace changes. A supplier with a change-control process tells you before the change reaches your parts; a supplier without one tells you after, or not at all. This is the question that separates a program supplier from a transactional one.
6. Capacity and scheduling
Ask what the current loading is, what the quoted schedule covers, and what happens when a program ramps. Ask how the schedule is tracked and how delays are communicated. A supplier who volunteers the constraint is managing it; one who does not will discover it at the shipping date.
7. Environmental, safety and handling
Magnet production involves abrasive dust, high temperatures and strong magnetic fields. Ask about extraction, about how parts are handled to avoid chipping, and about how magnets are packed to survive transit. Handling discipline shows up directly in the chip rate you receive.
8. Export compliance
Ask how grades containing dysprosium or terbium, and all samarium-cobalt, are documented for export. The answer should be a process, not an assurance. Export documentation is a legal requirement with real lead time, and it belongs in the supplier's process rather than in your shipping department's problems.
Questions worth asking in any audit
- Show me the calibration certificate for the fluxmeter used on my parts.
- What tolerance do you hold as standard, and what does tighter cost?
- How do I trace a part I received last year to its production lot?
- What changes in your process would trigger a notification to me?
- Which of my grades needs export documentation, and who prepares it?
Frequently asked questions
Can I audit remotely?Yes, for most of the checklist. Records, calibration certificates and process descriptions can be reviewed remotely; physical inspection is better in person but not essential for a first qualification.
Is certification enough?Certification tells you a system exists. It does not tell you whether the instrument that measured your parts was calibrated. Ask for both.
What is the biggest red flag?An inspection report with no measurement data behind it, or a supplier who cannot say which instrument produced a number.
How often should a supplier be re-audited?Annually for a program supplier, or after any change of ownership, location or major process change.
Preparing to qualify a supplier? Ask us for our audit pack: calibration records, process capability and traceability, before you commit.