NdFeB

N35 Disc Magnet

N35 disc magnets are the economical entry point of the sintered NdFeB disc range. YUECI KEJI presses, slices and finishes N35 discs to your diameter and thickness, with axial, diametric or radial magnetization and full lot traceability.

N35 Disc Axial / Diametric / Radial Custom size Coated to spec
N35 Disc Magnet - YUECI KEJI

Applications

High-volume holding, latching and craft builds

Sensor targets and spacers

Education and demonstration kits

Why buyers choose it

  • N35 is the most economical commercial NdFeB grade for high-volume, low-duty discs.
  • Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
  • Magnetization to drawing: axial through the face, diametric across the diameter, or radial for rotary sensing.
  • Coatings from bright Ni-Cu-Ni to non-reflective black epoxy for optical and medical builds.

Specifications

GradeN35
ShapeDisc
CoatingNi-Cu-Ni, Zn, Epoxy, Au (custom on request)
ToleranceDimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
MagnetizationAxial / Diametric / Radial
ApplicationsHigh-volume holding, latching and craft builds, sensor targets and spacers, education and demonstration kits
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export controlExport classification is confirmed per shipment against the product composition and destination.

What is an N35 disc magnet

N35 disc magnets are flat, cylindrical permanent magnets pressed and sintered from NdFeB powder and ground to a precise diameter and thickness. The disc format — two large parallel faces and a short axial length — makes it the workhorse shape for stacking, holding and flux-target jobs where the field is wanted through the flat face. N35 is the entry grade of the range, chosen when the envelope is generous and the volume is high.

N35 magnetic performance

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.

Why choose N35

N35 is the entry grade of the commercial range. It gives up energy product against N42 and above, and in exchange it is the easiest grade to press and grind in thin or awkward geometries and the cheapest per kilogram. It suits high-volume, low-duty work where the envelope is generous and the budget is not.

Shape, dimensional tolerance and magnetization

Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

Surface treatment

Test conditions and reports are available on request.

Coating choice follows the environment: bright Ni-Cu-Ni for indoor and clean-room work, zinc for cost-sensitive volume, and epoxy where the part is handled, exposed to salt mist or must not glare. Bare NdFeB corrodes quickly, so every disc leaves the plant coated unless the brief explicitly calls for a phosphated or as-ground finish.

Typical applications

N35 discs end up wherever quantity beats peak force: retail and craft assemblies, educational kits, latching and holding fixtures, sensor targets and spacer stacks. When the same job is re-quoted on N48 or N52 the part shrinks; when it stays on N35 the price stays low.

Handling, storage and shipping

Sintered NdFeB is hard but brittle: it chips on impact and pinches fiercely when it snaps to steel. Parts ship in padded, magnetically shielded or spaced packing with keepers where the design calls for them, and air freight follows IATA packing instruction 902 with the field at the package surface measured before dispatch.

Custom sizing, prototyping and order minimums

Every dimension, grade suffix, coating and magnetization direction is built to your drawing or reproduced from your sample. Samples and small batches come first, then volume; repeat orders are faster because the tooling and the inspection routine already exist. Minimum order quantities are quoted per inquiry against the geometry and the grade.

Grade, temperature and coating — how this part is specified

A complete specification names the grade (including the temperature suffix), the shape and dimensions with tolerances, the magnetization direction, the coating and the destination. With those five points YUECI KEJI quotes quickly; with any of them missing the project waits. Working temperature is set by the suffix, not by the shape, and the coating is set by the environment.

Designing the magnetic circuit and working on the line

N35 leaves the most margin for circuit redesign. If a prototype on N35 misses the force target, the cheapest fix is usually a thicker disc or a second magnet rather than a grade change, because N35 discs are inexpensive enough to add material. If the envelope is fixed, stepping up to N48 recovers roughly 10% more flux in the same envelope.

When to choose a different shape

A disc is the default. Move to a ring when the part must mount on a shaft or let flux through the centre, to a countersunk disc when the magnet is also the mounting point, and to a block when a large flat pole area is worth more than a round one.

Where this material is typically used

Sintered NdFeB discs in this grade end up in consumer hardware, craft and educational products, holding fixtures and light sensing duties — the high-volume, cost-first jobs where a stronger grade would be over-specified.

Buyer Questions

N35 Disc Magnet FAQs

Which magnetization direction should an N35 disc use?

Axial through the flat faces is standard for holding and stacks. Diametric or radial magnetization is used when the field must sit across or around the disc for sensing or rotary encoding.

Can you hold a tight thickness tolerance on N35 discs?

Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

Are N35 discs export Export documentation and licensing requirements are confirmed per shipment.?

Export classification is confirmed per shipment against the product composition and destination.

Request a quote for N35