Phone Magnet

MagSafe Neodymium Ring Magnet

A MagSafe-type neodymium ring magnet is a thin, axially magnetized NdFeB ring that phone-case makers and wireless-charger OEMs embed to snap a phone onto a magnetic mount or align it on a charger. YUECI KEJI presses it to your outer diameter, inner diameter and thickness and grades it N52 or N48H to match field and temperature needs.

NdFeB N52 N48H Axial Thin Ring OEM
MagSafe-type Neodymium Ring Magnet - YUECI KEJI

Specifications

MaterialSintered NdFeB (neodymium-iron-boron)
GradeN52 (80 °C) / N48H (120 °C) — selected per application
FormThin ring, axial magnetization
DimensionsOD / ID / thickness quoted per inquiry
ToleranceDimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
PlatingNi-Cu-Ni as standard; epoxy on request
Pole senseMarked per lot for correct orientation
ApplicationsPhone cases, wireless-charger alignment, magnetic mounts
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export licensingReviewed at order confirmation (NdFeB)

What a MagSafe-type neodymium ring magnet is

A MagSafe-type neodymium ring magnet is a thin, axially magnetized NdFeB ring. Phone-case makers and wireless-charger OEMs press it into a case or charger so the phone snaps into a repeatable position on a magnetic mount or lines up squarely over the charging coil. The ring is the component; the intelligence of the alignment comes from placing it to the right outer diameter, inner diameter and thickness for the host part. YUECI KEJI presses each lot to your drawing and grades it N52 or N48H.

N52 or N48H

N52 delivers the highest energy product at room temperature and covers the large majority of phone cases and desktop chargers. N48H is the grade to choose when the magnet sits near a warm component or in a higher-ambient environment, because the H grade holds its field to roughly 120 °C instead of 80 °C. YUECI KEJI keeps both grades on the same production line so a design can move between them without re-tooling the assembly.

Why axial magnetization

Axial magnetization gives the ring a clean north face on one flat side and a south face on the other. That is what makes the phone find the same orientation every time it is placed on the mount or charger, rather than rotating freely. YUECI KEJI marks the pole sense on each lot so parts cannot be fitted the wrong way during high-volume assembly.

How it is supplied to OEMs

YUECI KEJI supplies the ring by the thousand as loose parts, or as pre-oriented, pole-marked sets when the assembly line needs a fixed sense. Outer diameter, inner diameter and thickness are quoted per drawing, with flatness held tight enough for automated pick-and-place. Plating is Ni-Cu-Ni as standard, with epoxy available where the ring contacts a bonded or damp interface.

Handling, licensing and storage

Export classification is confirmed per shipment against the product composition and destination.

Why buyers choose it

  • Thin ring profile keeps the assembled case or charger slim.
  • Axial magnetization gives a clean north-south face for reliable snap alignment.
  • N52 for everyday use, N48H where the circuit runs warmer.
  • Supplied by the thousand to case makers and charger OEMs from one source.

Applications

Phone-case makers embedding a magnetic alignment ring

Wireless-charger OEMs aligning the coil-to-phone interface

Magnetic car- and desk-mount brands

Retail and POS fixture makers using snap-on display parts

Buyer Questions

MagSafe Neodymium Ring Magnet FAQs

What grade should I specify, N52 or N48H?

N52 gives the highest energy product at room temperature and suits most phone cases and chargers. Choose N48H when the magnet sits near a warm component or in a higher-ambient environment, since the H grade holds its field to about 120 °C.

Do you supply loose rings or pre-oriented sets?

Both. YUECI KEJI supplies loose rings by the thousand, or pre-oriented and pole-marked sets when your assembly line needs a fixed north-south sense to avoid mis-fitting.

Can the ring be made thinner or with a specific OD/ID?

Yes. Outer diameter, inner diameter and thickness are quoted per your drawing. YUECI KEJI keeps the wall and face flatness tight enough for automated pick-and-place in case and charger assembly.

Is there anything to handle for export?

Export classification is confirmed per shipment against the product composition and destination.

Request a quote for NdFeB Ring Magnet (MagSafe type)