Assembly
Neodymium Pot Magnet
Neodymium pot magnets mount a NdFeB disc in a steel cup that focuses the field and protects the magnet. YUECI KEJI supplies pot assemblies with countersunk bore, threaded stud or plain base.
Specifications
| Magnet | Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation. |
|---|---|
| Housing | Steel cup, zinc-plated or Ni-Cu-Ni |
| Shape | Pot / cup assembly |
| Coating | Zinc plating / Ni-Cu-Ni / epoxy on request |
| Tolerance | Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation. |
| Magnetization | Axial (single pole face) |
| Applications | Holding and mounting, Lighting and signage, Workholding |
| Lead time | Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method. |
| MOQ | Quoted per inquiry |
| Export control | Export classification is confirmed per shipment against the product composition and destination. |
What is a neodymium pot magnet
A neodymium pot magnet — also called a cup magnet — is a sintered NdFeB disc pressed into a steel cup. The cup does two jobs: it conducts flux to the working face so the assembly pulls harder than the bare magnet inside it, and it shields and protects the magnet from impact and corrosion.
At YUECI KEJI pot assemblies are supplied with a countersunk bore, a threaded stud or a plain base, in zinc-plated or nickel-plated steel, with the magnet grade chosen to the force target.
How the gaussmeter works
Flux leaves the magnet’s working face, spreads through the steel cup and concentrates at the rim, then returns through the workpiece to the back of the cup. Because the return path is steel rather than air, far more of the magnet’s flux does useful work, and the pull force of the assembly can be roughly double that of the bare disc.
The trade is reach. A pot assembly is strongest in direct contact and falls away quickly with distance, so it suits close-contact holding rather than field-at-a-gap duty.
Magnet, material and finish
The magnet is sintered NdFeB in the commercial grade range, sized to the cup and the force target. The cup is steel, zinc-plated or nickel-plated, with epoxy coating available for corrosive or handled environments.
Because the magnet is fully enclosed, the assembly tolerates environments that would corrode a bare disc — which is why pot magnets are the default for outdoor, workshop and retail duty.
Typical applications
Pot assemblies end up wherever a magnet has to be mounted and forgotten: holding and mounting assemblies, lighting and signage, retail fixtures, workholding and inspection setups.
Handling, storage and shipping
Pot assemblies are robust but the magnet inside is still brittle, so they ship in padded packing with the working faces protected. Steel cups attract each other fiercely in bulk, so cartons are spaced or separated.
Fixing variants — countersunk, stud and plain base
The fixing is part of the design, not an afterthought. A countersunk bore lets a screw sit flush for a low-profile mount; a threaded stud — internal or external — gives a raised fixing point for standoffs and brackets; and a plain base is for bonding or press-fitting into a housing. YUECI KEJI specifies the fixing with the part so the assembly arrives ready to mount.
Pull force versus shear force
A pot magnet’s steel cup gives it a strong normal (pull-away) force on the working face, but the same assembly is weak in shear — sliding or side loads across the face. Where the duty includes side loads, add a mechanical fixing through the cup rather than relying on the magnet alone.
Temperature and grade selection
The commercial NdFeB range runs N35 to N52; where the assembly runs warm, a high-temperature suffix (H, SH, UH or EH) holds the field at higher temperature, and the usable pull force derates as temperature rises. Tell YUECI KEJI the operating temperature and the grade is chosen to keep the hold through the duty.
Custom sizing, prototyping and order minimums
Every assembly is built to your drawing or reproduced from your sample: magnet grade, cup dimensions, thread or fastener, finish and packing. Samples come first, then volume; repeat orders are faster because the tooling and the pull-force routine already exist.
Grade, temperature and coating — how this part is specified
A complete assembly specification names the magnet grade, the cup or housing material and dimensions, the fastener or thread, the finish, the required pull force and the destination. Pull force is quoted against a defined test block, because the number depends on the steel as much as on the magnet.
Designing the magnetic circuit and working on the line
A pot assembly is specified by the pull force it must deliver on a defined test block, because the number depends on the steel as much as on the magnet. If the force target is missed, the cheapest fix is usually a larger cup or a higher grade in the same cup, not a different assembly type.
When to choose a different shape
A pot magnet is the default for close-contact holding. Move to a bare disc when reach matters more than force, to a hook or clamp when the load has to hang, and to a separator grid when the job is filtration rather than holding.
Where this material is typically used
Pot assemblies end up in every trade that mounts things with magnets — lighting, signage, retail, workshop and inspection work.
Why buyers choose it
- The steel cup roughly doubles the pull force of the bare disc it contains.
- The cup also shields and protects the magnet from impact and corrosion.
- Countersunk bore, threaded stud or plain base — the fixing is part of the design.
- Single pole face: the working face is the only strong pole, which simplifies fixturing.
Applications
Holding and mounting assemblies
Lighting, signage and retail fixtures
Workholding and inspection
Door, hatch and panel catches
Jigs, fixtures and inspection setups
Whiteboard, sign and display grips
Non-overhead lifting and handling aids
Buyer Questions
Neodymium Pot Magnet FAQs
Why does a pot magnet pull harder than a bare disc?
The steel cup conducts flux to the working face and returns it through the workpiece, so more of the magnet’s flux does useful work. The same disc in a cup can roughly double its pull force.
What fixings are available?
Countersunk bore for a flush screw, threaded stud (internal or external), or a plain base for bonding. The fixing is specified with the part.
Are pot magnets export Export documentation and licensing requirements are confirmed per shipment.?
Export classification is confirmed per shipment against the product composition and destination.
Can I use a pot magnet for overhead lifting?
No. Pot magnets are holding devices, not lifting-rated equipment. For overhead or personnel-near lifting use properly rated lifting gear; a pot magnet is for positioning and holding at rest.
How does temperature affect the hold?
As temperature rises the magnet’s output falls; beyond its rated temperature a high-temperature grade is needed and the pull force is lower than at room temperature. State the operating temperature and the grade is matched to it.
Request a quote for Neodymium Pot Magnet
You may also like

