Mount Accessory

Adhesive MagSafe Ring Sticker

An adhesive MagSafe ring sticker is a thin NdFeB ring carried on a pressure-sensitive backing so an accessory brand can stick magnetic alignment onto a phone, case or mount without molding it in. YUECI KEJI supplies the ring with liner on reel or sheet, graded N52 or N48H, ready for your converting line.

Adhesive NdFeB Stick-on Reel Mount B2B
Adhesive MagSafe Ring Sticker - YUECI KEJI

Specifications

MaterialSintered NdFeB ring on pressure-sensitive adhesive
GradeN52 (80 °C) / N48H (120 °C)
BackingPressure-sensitive adhesive with release liner
FormSingle ring, or reel / sheet for converting
DimensionsOD / ID / thickness quoted per inquiry
Peel strengthQuoted per adhesive specification
Pole senseMarked per lot for correct orientation
ApplicationsStick-on mounts, car mounts, magnetic wallets
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export licensingReviewed at order confirmation (NdFeB)

What an adhesive MagSafe ring sticker is

An adhesive MagSafe ring sticker is a thin NdFeB ring carried on a pressure-sensitive backing. Rather than molding the magnet into a case or charger, an accessory brand sticks it onto a flat surface — a phone back, a car-mount plate, a wallet — and that surface becomes a magnetic-mount point. YUECI KEJI supplies the magnetic component on reel or sheet, graded N52 or N48H, ready for your own die-cut and packaging line.

Reel and sheet for converters

The value of the adhesive form is that it converts on existing equipment. YUECI KEJI supplies the ring loose for manual kits, on sheet for short runs, or on reel spaced for automated die-cut and pick-and-place. Pole sense is marked per lot so orientation stays correct through high-volume placement, which is the difference between a sticker that snaps the phone the right way and one that does not.

N52 or N48H on a sticker

N52 covers everyday stick-on mounts and wallets at room temperature. N48H is specified when the sticker sits near a warm component or in a hotter cabin or workshop environment, since the H grade holds field to about 120 °C. YUECI KEJI keeps both grades available so a product line can shift without re-tooling the converting step.

Matching the adhesive to the job

The pressure-sensitive adhesive and release liner are chosen against the substrate and how the part is used. A sticker that stays put on a glass car-mount needs a different peel specification than one that is repeatedly stuck and unstuck on a wallet. YUECI KEJI quotes peel strength against your surface and temperature range rather than applying one generic adhesive to every order.

Performance and handling

Export classification is confirmed per shipment against the product composition and destination.

Why buyers choose it

  • Turns any flat surface into a magnetic-mount point without molding in a magnet.
  • Supplied on reel or sheet so accessory brands convert it on existing die-cut lines.
  • N52 for everyday stick-on use, N48H where the mount runs warmer.
  • Liner and pole marking keep orientation correct through high-volume placement.

Applications

Stick-on phone and car mounts for accessory brands

Magnetic wallet and card-holder attachments

Retail display fixtures that snap promotional parts on and off

Aftermarket kits converting non-magnetic cases to magnetic

Buyer Questions

Adhesive MagSafe Ring Sticker FAQs

Is this the bare ring or a finished consumer sticker?

YUECI KEJI supplies the magnetic component — the NdFeB ring on its adhesive backing, on reel or sheet. Accessory brands and converters print, die-cut and package it under their own brand; YUECI KEJI does not sell a finished consumer sticker.

What adhesive and peel strength do you offer?

A pressure-sensitive adhesive with release liner is standard, with peel strength quoted against your substrate and temperature range. Tell YUECI KEJI the surface the sticker will bond to and whether it faces repeated on-off cycles, and the adhesive is matched accordingly.

Can it be supplied on reel for automated placement?

Yes. The ring is supplied loose, on sheet, or on reel spaced for die-cut and pick-and-place lines. Pole sense is marked per lot so orientation stays correct through converting.

Does the adhesive change the magnetic performance?

The thin adhesive layer sits on the back face and does not sit in the magnetic gap, so it barely affects the snap force at the working face. YUECI KEJI keeps the magnetic-ring thickness where the field needs it and treats the backing as a separate converting layer.

Request a quote for Self-Adhesive Magnetic Ring