Assembly

Magnetic Tool Holder

Magnetic tool holders are mounting assemblies that fix a NdFeB magnet in a shaped base for bench and workshop work. YUECI KEJI supplies tool holders with plain, threaded or bonded mounting.

NdFeB + steel base Shaped base Single pole face Plain / threaded / bonded Zinc or epoxy coated
Magnetic Tool Holder - YUECI KEJI

Applications

Bench and workshop holding

Assembly and inspection fixtures

Display and signage mounting

Why buyers choose it

  • The steel base conducts flux to the working face and protects the magnet.
  • Shaped bases — triangular, rectangular or round — suit the bench or fixture they serve.
  • Plain, threaded or bonded mounting, specified with the part.
  • Single pole face: the working face is the only strong pole, which simplifies fixturing.

Specifications

MagnetAvailable grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.
HousingSteel base, zinc-plated or epoxy coated
ShapeTool holder / mounting assembly
CoatingZinc plating / Ni-Cu-Ni / epoxy on request
ToleranceDimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
MagnetizationAxial (single pole face)
ApplicationsBench and workshop holding, Assembly fixtures, Display and signage
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export controlExport classification is confirmed per shipment against the product composition and destination.

What is a magnetic tool holder

A magnetic tool holder is a mounting assembly that fixes a sintered NdFeB magnet in a shaped steel base. The base does two jobs: it conducts flux to the working face so the assembly holds harder than the bare magnet, and it gives the magnet a shape, a fixing and a level of protection the bare part could never have.

At YUECI KEJI tool holders are supplied with plain, threaded or bonded mounting, in base shapes that suit the bench or fixture they serve.

How the gaussmeter works

Flux leaves the magnet’s working face, spreads through the steel base and concentrates at its edges, then returns through the workpiece. Because the return path is steel rather than air, the assembly holds harder than the bare disc inside it.

The base also sets where the magnet can go: a triangular base reaches into a corner, a round base spins on a bench, and a plain base bonds flush to a surface. The fixing is part of the design, not an afterthought.

Magnet, material and finish

The magnet is sintered NdFeB in the commercial grade range, sized to the base and the holding target. The base is steel, zinc-plated or epoxy coated, with the magnet fully enclosed.

Because the magnet is enclosed, the assembly tolerates workshop conditions — knocks, swarf and coolant — that would destroy a bare disc.

Typical applications

Tool holders end up wherever a magnet has to be mounted and used as a fixture: bench and workshop holding, assembly and inspection fixtures, and display and signage mounting.

Handling, storage and shipping

Assemblies ship in padded packing with the working face protected. Bases in bulk attract each other, so cartons are spaced or separated.

Custom sizing, prototyping and order minimums

Every assembly is built to your drawing or reproduced from your sample: magnet grade, cup dimensions, thread or fastener, finish and packing. Samples come first, then volume; repeat orders are faster because the tooling and the pull-force routine already exist.

Grade, temperature and coating — how this part is specified

A complete assembly specification names the magnet grade, the cup or housing material and dimensions, the fastener or thread, the finish, the required pull force and the destination. Pull force is quoted against a defined test block, because the number depends on the steel as much as on the magnet.

Designing the magnetic circuit and working on the line

A tool holder is specified by the holding target and the bench it serves. If the hold is short, a larger base or a higher grade in the same base recovers more than changing assembly type.

When to choose a different shape

A tool holder is the default for bench mounting. Move to a pot magnet when the fixing is a screw through the centre, to a clamp when the load has to be positioned, and to a lifter when the load is plate.

Where this material is typically used

Tool holders end up on benches, in fixtures and on display walls — anywhere a magnet has to be mounted rather than held.

Buyer Questions

Magnetic Tool Holder FAQs

What base shapes are available?

Plain, triangular, rectangular and round bases are routine, and any shape can be built to drawing. The base shape follows the bench or fixture it has to serve.

How is a tool holder mounted?

By bonding to the bench, by a threaded stud, or by a countersunk screw through the base. The fixing is specified with the part.

Are tool holders export Export documentation and licensing requirements are confirmed per shipment.?

Export classification is confirmed per shipment against the product composition and destination.

Request a quote for Magnetic Tool Holder