Flexible Ferrite
Anisotropic Rubber Magnet Sheet
Anisotropic rubber magnet sheet is magnetized in one fixed direction while it is calendered, giving more energy per millimetre of thickness than isotropic sheet. YUECI KEJI grades each lot and marks the pole sense so parts cannot be fitted the wrong way.
Specifications
| Material | Flexible ferrite — strontium ferrite powder in polymer binder (oriented) |
|---|---|
| Form | Calendered sheet or strip, cut to size |
| Magnetization | Fixed direction set during calendering — higher energy per thickness |
| Thickness | Custom, quoted per inquiry |
| Pole sense | Marked per lot to prevent mis-fitting |
| Surface | Plain, adhesive-backed or printable on request |
| Applications | Holding, closures, higher-field flexible magnets |
| Lead time | Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method. |
| MOQ | Quoted per inquiry |
| Export control | Export classification is confirmed per shipment against the product composition and destination. |
What anisotropic rubber magnet sheet is
Anisotropic rubber magnet sheet is calendered from strontium ferrite in a flexible binder while a magnetic field fixes the magnetization direction in one axis. That orientation is what gives the material more energy per millimetre of thickness than isotropic sheet. YUECI KEJI calenders each lot to your gauge and marks the pole sense so converted parts cannot be fitted the wrong way.
Why choose anisotropic
When the magnetization direction is known up front and field strength per thickness matters most, anisotropic sheet is the efficient choice. The trade-off is that the direction is locked during calendering and cannot be re-oriented after cutting, so the pole layout must be settled before production. For applications where a stronger thin magnetic layer beats convertibility, it is the right grade. YUECI KEJI quotes energy and surface field against your thickness target.
Cutting and converting
Like other flexible ferrite, it cuts with a knife, die or rotary cutter and bends around curved steel, but care is needed to keep the active face oriented correctly. YUECI KEJI pre-cuts blanks and strips to your drawing and can apply adhesive or printable faces while preserving the marked pole sense. Stating the required magnetization direction on the drawing removes mis-fitting risk at converting.
Where it is used
Anisotropic flexible sheet is chosen for magnetic holding, closures and latches, higher-field flexible signs and displays, and appliance or cabinet door seals where a stronger thin magnet is worth the fixed-direction constraint. YUECI KEJI supplies both the raw oriented sheet and the converted variants from one source.
Handling and storage
The sheet is flexible but not elastic — creasing leaves a permanent mark, so store it flat or on the reel and avoid sharp folds. Keep it dry and away from strong demagnetizing fields. The oriented binder gives a modest but useful surface field and handling is straightforward compared with neodymium. YUECI KEJI packs flat-pressed or reeled to protect the profile in transit.
Why buyers choose it
- Fixed-direction magnetization delivers more field per millimetre than isotropic sheet.
- Pole sense is marked per lot so converted parts cannot be fitted the wrong way.
- Holds a stronger field while staying thin and bendable.
- Supplied as sheet, strip or pre-cut blank to your drawing.
Applications
Magnetic holding, closures and latches
Higher-field flexible signs and displays
Appliance and cabinet door seals
Base stock for adhesive or printable converting
Buyer Questions
Anisotropic Rubber Magnet Sheet FAQs
When should I pick anisotropic over isotropic?
Choose anisotropic when field strength per millimetre of thickness is the priority and the magnetization direction is known up front. Because the direction is fixed during calendering, it cannot be re-oriented after cutting, so the pole layout must be decided before production.
How do I avoid fitting the sheet the wrong way?
YUECI KEJI marks the pole sense on every lot and can pre-cut blanks so the active face is unambiguous. Stating the required magnetization direction on your drawing removes the risk at the converting stage.
Is the field much stronger than isotropic sheet?
Per given thickness, anisotropic sheet carries meaningfully more energy because the ferrite is oriented in one direction. How much stronger depends on gauge and grade; YUECI KEJI quotes energy and surface field against your thickness target.
Is it export Export documentation and licensing requirements are confirmed per shipment.?
Export classification is confirmed per shipment against the product composition and destination.
Request a quote for Flexible Ferrite (Anisotropic)
You may also like


