Alnico

Alnico Bar Magnet

Alnico bar magnets are aluminium-nickel-cobalt bars prized for thermal stability from cryogenic up to several hundred degrees Celsius. YUECI KEJI casts or sinters alnico bars to drawing with low drift for sensors and instruments.

Alnico Bar Temperature stable Cast / sintered Low drift
Alnico Bar Magnet - YUECI KEJI

Applications

Sensors and transducers

Meters and precision instruments

Specialty motors and generators

Pole pieces and magnetic fixtures where a stable, reproducible field matters more than peak strength.

Educational and laboratory apparatus needing a simple, temperature-stable field source.

Why buyers choose it

  • Alnico's very low temperature coefficient keeps field stable over a wide range.
  • Cast or sintered, so complex bar shapes are practical.
  • Less brittle than ferrite and more machinable after casting.
  • Supplied unmagnetized or magnetized, with keeper advice on request.
  • Bar and rod stock fixture and stack cleanly in sensors, transducers and holding assemblies.
  • Straight edges suit magnetic circuits built from laminated or machined components.
  • Long or irregular profiles are practical because alnico is cast or sintered, not pressed from powder.

Specifications

GradeAlnico (Al-Ni-Co)
ShapeBar / rod
CoatingBare / Epoxy / Ni-Cu-Ni (custom on request)
ToleranceDimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
MagnetizationAxial along the bar
ApplicationsSensors and transducers, Meters and instruments, Specialty motors
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export controlExport classification is confirmed per shipment against the product composition and destination.

The alnico bar as a pole piece

An alnico bar is a straight aluminium-nickel-cobalt slug whose poles sit on its two ends. You reach for it when the field has to run the full length of a part you can bolt down, clamp in a fixture, or drop into a demonstration. The bar is the oldest, most readable two-pole magnet shape in the catalogue.

At YUECI KEJI bars are cast or sintered to your cross-section and length, magnetised end to end, then inspected. Cross-section, length, grade and any drilling or machining are built to drawing.

How the lengthwise field shapes the part

Because the poles are on the ends, the useful field travels tip to tip, so a bar is the natural choice for a long, even two-pole path. We hold commercial tolerances on length and cross-section, with tighter bands quoted per drawing. Alnico is brittle like a soft tool steel, so bars are machined to final size before magnetisation, never after.

Heat is where alnico wins

For a bar, the lengthwise field is the thing to protect: alnico holds flux where NdFeB and ferrite fade, and it takes mechanical heat that wrecks other magnets. The price is low coercivity — a field opposing the end-to-end magnetisation can partly demagnetise it, so bar layouts keep a safe point with good return iron. Indoor air needs no plating.

Where bars actually go

Bars are the teaching, lab and instrument staple: physics demonstrations, classroom kits, magnetic chucks and clamps, sensor and meter pole pieces, and high-temperature holding where other magnets quit. When you want a field you can see, mount and remagnetise, the bar is the default.

Packing and storage

Bars ship in padded packing with the ends protected; a bar is easy to clamp by its body, but keep it clear of strong transverse fields that could knock it down. Indoor storage needs no plating.

Custom lengths, cross-sections and minimums

Every length, cross-section, grade and finish is built to your drawing or matched from a sample. Bars are machined before magnetisation; prototype quantities are supported.

Specifying a bar order

Name the grade, the cross-section and length, the lengthwise magnetisation, any machining and the quantity. The exact temperature class is confirmed on request.

Designing the bar circuit

A bar is an end-to-end two-pole path: route return iron from one face to the other at low reluctance, and shield the ends from any field opposing the lengthwise magnetisation. Heat stability is the bar's real advantage, so it is the pick when temperature rules out NdFeB and ferrite.

When a bar is the wrong shape

A bar fits a lengthwise field you can mount or demo. Move to a disc when the field must cross a flat face, to a ring when you need a centred bore, and to NdFeB when cold pull beats temperature.

Where bars are typically used

They end up in classrooms, labs, chucks, clamps and hot instruments — the stable, handleable, heat-proof two-pole work other magnets cannot do.

Buyer Questions

Alnico Bar Magnet FAQs

Why choose alnico over neodymium for a bar?

Alnico's field stays predictable across a much wider temperature range than neodymium, which is why it is specified for sensors and instruments where drift cannot be tolerated. Neodymium wins on raw strength at room temperature.

Does alnico need a keeper in storage?

Because alnico has low coercivity it is easier to demagnetize if mishandled, so bars are often stored with a keeper. We can advise on storage and supply magnetized or unmagnetized parts.

Are alnico bars export Export documentation and licensing requirements are confirmed per shipment.?

Export classification is confirmed per shipment against the product composition and destination.

Request a quote for Alnico

You may also like