ENGINEERING

What Is a Gaussmeter? How Field Strength Is Measured | YUECI KEJI

A gaussmeter is the instrument behind every magnetic specification you have ever been given, and the one most buyers have never used. Here is what it does and how to read it.

A gaussmeter measures magnetic flux density, the quantity engineers call B, at a point in space. It is the instrument that turns "this magnet feels strong" into a number you can put on an inspection report, and it is one of the two instruments, along with the fluxmeter, that a magnet supplier uses to control production.

How it works

The sensing element is a Hall-effect probe: a thin semiconductor chip through which a small current flows. When the probe is placed in a magnetic field, the field deflects the charge carriers and a voltage appears across the chip, proportional to the field component perpendicular to it. The meter amplifies that voltage and displays it in gauss or tesla, with one tesla equal to 10,000 gauss. The two units describe the same quantity; gauss is traditional in the industry and tesla is the SI unit, and most meters display both.

Axial, transverse and 3D probes

A simple probe measures the field along one axis. An axial probe has its sensitive axis along the stem, so you point it at the surface. A transverse probe measures across the stem, so you bring it alongside. A three-axis probe measures all three components simultaneously and reports the vector magnitude, which is what you want when mapping a complex field or verifying a multipole pattern. For routine incoming inspection of a disc magnet, a single-axis probe is sufficient; for anything with a multipole pattern, the three-axis version saves a great deal of time.

Gaussmeter versus fluxmeter

The two instruments answer different questions. A gaussmeter asks how strong the field is at this point. A fluxmeter, used with a search coil wound around the magnet, asks how much total flux the magnet carries. Flux is the more useful number for production control, because it is far less sensitive to exactly where the probe was placed and it correlates directly with the magnet's grade and geometry. Surface field is the more useful number for a quick bench check or for verifying that a pole is where the drawing says it is.

What to look for when buying one

For incoming inspection of purchased magnets, four things matter. Calibration, with a certificate and a stated interval, because an uncalibrated meter produces numbers you cannot defend. Probe range, matched to the fields you actually expect, because a probe rated for weak fields saturates on a strong NdFeB part and a probe rated for strong fields has poor resolution on a ferrite one. Resolution appropriate to your tolerance, typically a few gauss for routine work. And a probe small enough to fit where the measurement has to be taken, because a large probe averages over an area and smears out exactly the peak you were trying to read.

How suppliers use them

In a magnet plant, gaussmeters and fluxmeters appear at three points. After magnetizing, a flux measurement confirms each part reached full strength. During multipole fixture verification, a stepped Hall probe maps the pole positions and angles. At final inspection, a surface field spot check catches gross errors before packing. The results go into the lot record against your part number, which is what makes a re-order two years later behave like the original.

Frequently asked questions

Can I use a phone app as a gaussmeter?Some phones have magnetometers, and apps can display rough field strength, but they are uncalibrated, saturate easily and cannot be defended on an inspection report.

Why do two meters give different readings on the same magnet?Probe size, probe position and calibration. A large probe reads lower than a small one on a peaked field, and a fraction of a millimetre of offset changes the reading on a small part.

Do you sell gaussmeters?We supply digital gaussmeters as part of the measuring-tools range, alongside tesla meters intended for production and inspection use.

What is a teslameter?The same instrument as a gaussmeter, displaying tesla instead of gauss. The names are used interchangeably in the industry.

Setting up incoming inspection for magnets? Tell us your tolerance and we will suggest the measurement and the instrument that fits.