Guides

N42 vs N52 Magnet: The Default Grade Against the Top Grade | YUECI KEJI

N42 and N52 bracket the useful middle of the commercial NdFeB range: the balanced default and the strongest standard grade. Most designs land on one or the other, and the reasoning is worth making explicit.

N42 and N52 bracket the useful middle of the commercial NdFeB range: the balanced default and the strongest standard grade. Most designs land on one or the other, and the reasoning is worth making explicit.

The datasheet comparison

Per the YUECI KEJI sintered NdFeB datasheet, N42 delivers 1.28–1.32 T remanence, at least 955 kA/m intrinsic coercivity and 39–44 MGOe maximum energy product. N52 delivers 1.42–1.47 T, the same 955 kA/m coercivity floor and 49–54 MGOe. That is roughly a 20% step in energy product for the same 80℃ temperature rating.

Because the coercivity floor is identical, the choice is purely about flux and economics — it is not a temperature decision.

Why N42 is the default

N42 presses, sinters and grinds with the best yield of the mid-range grades. Thin discs, large diameters and awkward aspect ratios all run more cleanly on N42 than on N52, and the material cost per kilogram is lower. On a high-volume program the yield difference compounds: fewer rejected parts, tighter lot-to-lot consistency, and a lower effective piece price.

Why N52 still exists

N52 exists for the designs that cannot grow. When the envelope is fixed by the customer's assembly and the force target is not met on N42, N52 is the only standard-grade answer short of changing the geometry. It is also the right grade when a smaller magnet is worth real money — in a handheld tool, a compact actuator or a weight-critical assembly.

The middle ground most designs miss

Between N42 and N52 sit N45, N48 and N50. A design that misses its target on N42 by 10% usually closes it on N48 or N50 — at a lower cost and with better yield than N52. Stepping grade by grade, rather than jumping to the top, is the cheapest path in most programs.

When the decision is forced

The decision is forced when the envelope is genuinely fixed and the force target is genuinely needed. Then N52 — or a temperature-suffixed grade if the duty is hot. In every other case, start at N42 and climb only as far as the target requires.

Frequently asked questions

How much stronger is N52 than N42? About 20% more maximum energy product, which translates into a similar order of force gain in a well-designed circuit using the same geometry.

Is N52 harder to manufacture? Yes. Higher-energy powder needs tighter process control, and thin or extreme aspect-ratio parts are more prone to damage and to demagnetisation risk during handling.

Should I redesign on N52 or change the shape? If the envelope allows a shape change, a thicker or larger N42 part is often cheaper than a compact N52 one. If the envelope is fixed, N52 is the answer.

Do N42 and N52 need different coatings? No — the coating menu is the same. Coating is an environment decision, not a grade decision.

If your application is covered here, Request a quote with the drawing or the duty conditions and we will confirm what is feasible.