Magnets appear on packaging lines for a different reason than they do in motors. In a filling, capping or wrapping machine, the magnet is usually there to remove metal from the product stream or to sense a position without contact, and both jobs come with requirements that have little to do with pull force and everything to do with cleaning, validation and food safety.
Product-safety separation
Magnets on an infeed conveyor or in a hopper remove ferrous contamination before it reaches the product. The usual form is a plate magnet, a grate assembly or a magnetic pulley, and the specification follows the food-safety regime the plant operates under: the magnet has to be inspected and cleaned on a documented schedule, and its performance has to be verifiable. Ferrite dominates these positions because the field can be large and weak, the temperature is ambient, and the parts are cleaned regularly.
Magnetic conveyors and pulleys
Magnetic pulleys and conveyor drums separate ferrous tramp metal from bulk product, and can also transfer or hold ferrous components on a line. The magnet assembly inside is usually a set of arcs or blocks arranged to give an even field around the drum, and the specification is about coverage and uniformity rather than peak strength, because a stripe of weak field is a place where contamination passes through.
Film and label registration
Packaging machines register film and labels optically, but many also use a Hall sensor and a small magnet on a dancer roller or a registration mark follower to confirm position. These are consistency positions: the sensor needs a clean pulse or a stable reading, and the magnet's dimensions and flux have to be controlled so the reading does not drift from part to part.
Turret and capper positions
Capping turrets and rotary filling heads use position feedback for sequencing, and the sensing is often magnetic for its contactless reliability in a wet, washdown environment. Small magnetized discs or blocks pass sensors on the frame, and the positions are specified for survival of washdown as much as for function.
Cleaning, validation and material choice
Three requirements shape the specification. Cleaning: the magnet assembly has to be removable for inspection without dismantling the line, which is why plate and grate magnets are built with quick-release designs. Validation: performance has to be measurable, usually with a test piece or a pull test against a reference, so the magnet's field has to be stable over time. Material: ferrite for the separation positions, epoxy-coated NdFeB for the sensor positions where washdown is aggressive.
What to specify
For a separation assembly, send the conveyor width, the product depth and the contamination target. For a sensor position, send the air gap and the washdown regime. For both, send the cleaning schedule, because a magnet that cannot be inspected on the schedule the plant requires will be bypassed in practice. The separator selection guide covers the separation side in detail.
Frequently asked questions
Can a magnet replace a metal detector?They do different jobs. A magnet removes ferrous metal reliably; a metal detector detects ferrous, non-ferrous and stainless contamination but does not remove it. Many plants use both.
How often should line magnets be cleaned?On a documented schedule set by the plant's hazard analysis, often every shift for high-risk lines. The schedule is a plant decision, not a magnet decision.
Does stainless contamination get caught?Some austenitic stainless grades are weakly magnetic and are only partially captured. Where stainless is a risk, a metal detector is the reliable answer.
What coating survives washdown?Epoxy over nickel-copper-nickel, with stainless or sealed housings where the design allows. The sensor positions are the ones that need the coating decision.
Specifying magnets for a packaging line? Send the line layout and the cleaning regime and we will recommend the assemblies.