Guides

Magnet Tolerances and Dimensional Standards: What ±1% Really Means | YUECI KEJI

Magnet tolerance is not a single number applied to every dimension. It depends on the material, the process that produced the surface and the size of the part — and knowing which is which avoids most disputes.

Magnet tolerance is not a single number applied to every dimension. It depends on the material, the process that produced the surface and the size of the part — and knowing which is which avoids most disputes.

Where the tolerance comes from

Sintered NdFeB is pressed and fired, so the blank shrinks during sintering by an amount that depends on the powder, the pressing and the furnace cycle. That makes as-fired dimensions harder to hold than ground ones, which is why machining is where tight tolerances are actually produced.

The standard band

Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

When to ask for tighter

Press fits, tight air gaps and sensor stacks are the usual reasons. Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

How to write the specification

Name the critical dimensions and their bands separately from the rest, and state which surfaces are ground. A drawing that marks every dimension with the same tight band costs more and buys nothing; one that marks the three that matter gets what the assembly actually needs.

Frequently asked questions

How are tolerances confirmed? Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

Which dimensions should I mark critical? The ones the assembly depends on — press-fit diameters, air-gap thicknesses, hole positions. The rest can sit at the standard band.

How is tolerance verified? Dimensions are inspected against the drawing on a sampling plan agreed to the order, and results are recorded per lot.

If your question is not covered here, Request a quote and our engineering team will answer it directly.