Guides

How to Choose a Magnet for Outdoor Use | YUECI KEJI

Outdoor duty kills magnets in three ways: corrosion, temperature and mechanical shock. A magnet chosen for outdoor use has to survive all three.

Outdoor duty kills magnets in three ways: corrosion, temperature and mechanical shock. A magnet chosen for outdoor use has to survive all three.

Corrosion first

Bare NdFeB corrodes quickly, and outdoor duty is the fastest way to find out. The coating is therefore the first decision: Ni-Cu-Ni for general duty, epoxy for marine and handled duty, nickel-plus-epoxy for the most corrosive environments. Ferrite and alnico resist corrosion intrinsically and are often supplied bare.

Coating choice follows the environment: salt mist, UV, standing water and handling all push the specification up a grade.

Then temperature

Outdoor duty is thermal cycling duty. A part that sees a hot afternoon and a cold night moves through a range that standard NdFeB (80℃) may not survive at the hot end, and loses reversible flux at every cycle. Check the hot-spot temperature, not the average, and choose the suffix — M, H, SH — accordingly.

Ferrite and alnico both tolerate temperature far beyond the NdFeB range, which is one reason they remain common in outdoor industrial duty.

Then mechanical protection

Outdoor magnets get knocked. Sintered NdFeB and ferrite are both brittle, and a chipped edge is both a strength loss and a corrosion entry point. A steel cup or housing protects the magnet and is the usual answer for exposed mounting; for bonded parts, a recessed pocket keeps the magnet out of the impact path.

A practical specification

  • Coating — Ni-Cu-Ni minimum; epoxy or nickel-plus-epoxy for marine duty.
  • Grade — standard grades below 80℃; M or H for warmer duty; SH for genuinely hot duty.
  • Form — a pot or cup assembly for exposed mounting; a recessed pocket for bonded parts.
  • Material — NdFeB for force; ferrite or alnico where temperature and corrosion beat force density.

The decision

List the worst conditions the part will see — hottest afternoon, saltiest spray, hardest knock — and specify against those, not against the average. Outdoor magnets fail at the extremes, not the mean.

Frequently asked questions

What coating is best for outdoor magnets? Ni-Cu-Ni as a minimum; epoxy or nickel-plus-epoxy where there is salt mist, handling or standing water.

Do I need a high-temperature grade outdoors? Check the hot spot. A part in direct sun can exceed 80℃ at the surface, which is beyond the standard NdFeB rating — M or H suffixes cover most outdoor duty.

Are ferrite or alnico better outdoors? Both resist corrosion intrinsically and tolerate high temperatures, so they are strong choices where force density is not the constraint.

How do I protect an outdoor magnet mechanically? A steel cup or housing is the usual answer for exposed mounting; a recessed pocket keeps bonded magnets out of the impact path.

If your application is covered here, Request a quote with the drawing or the duty conditions and we will confirm what is feasible.