Guides

How to Choose a Fishing Magnet | YUECI KEJI

Fishing magnet choice comes down to one number — pull force — and one question: does the magnet have to work whichever way it lands?

Fishing magnet choice comes down to one number — pull force — and one question: does the magnet have to work whichever way it lands?

Decide the body style first

A single-face pot-style assembly pulls hardest when it lands face-down on a flat steel target. A double-sided assembly presents two pole faces and works whichever way it lands, at some cost in peak force. For retrieval in water, where orientation is unpredictable, the double-sided body is the usual answer.

The body also carries the eyebolt or rope mount, and it protects the magnet from the impact that retrieval duty inevitably involves.

Then the pull force

Pull force is quoted per assembly against a defined steel test block, because the number depends on the body size and the magnet grade — and on the steel as much as on the magnet. Ask for the rated figure on a stated test block rather than a generic claim, and match it to the heaviest object the job expects to recover.

Bigger bodies recover more force than grade changes, because the contact area grows with the body.

Then the plating and duty

Fresh water is forgiving; salt water is not. Zinc or nickel plating with a sealed body is the baseline for wet duty; rinse and dry after salt-water use to extend life. If the retrieval is in grit, rubble or industrial slurry, the body has to be specified for abrasion as well as corrosion.

Safety and handling

  • Retrieval assemblies are strong enough to pinch and to attract unexpectedly — keep fingers clear and control the approach.
  • Keep them away from electronics, magnetic storage and anyone with a pacemaker.
  • Retrieve with a rope rated well above the expected load, and expect the load to release unexpectedly when the assembly is levered off.

What to send with the enquiry

Send the heaviest expected object, the environment — fresh, salt, grit — and the line or rope arrangement. The body style, size and plating can then be quoted together against the duty.

Frequently asked questions

Is a double-sided fishing magnet weaker than a single-face one? Slightly, for a given body size — it trades peak face-down force for not caring which way it lands. For retrieval duty that trade is usually worth it.

How is pull force quoted? Per assembly against a defined steel test block. Ask for the rated figure on a stated block rather than a generic claim.

Can fishing magnets be used in salt water? With zinc or nickel plating and a sealed body, yes — rinse and dry after use to extend life.

What safety precautions apply? Pinch and unexpected-attraction risk: keep fingers clear, control the approach, and keep the assembly away from electronics, magnetic storage and pacemakers.

If your application is covered here, Request a quote with the drawing or the duty conditions and we will confirm what is feasible.