Grain boundary diffusion is the process that lets a magnet keep a high energy product while gaining the coercivity needed for hot duty. It is the reason SH, UH, EH and AH grades exist at all.
The coercivity problem
A base-grade NdFeB magnet such as N52 delivers maximum energy product but limited intrinsic coercivity, so it loses output as temperature rises. The classical fix — adding dysprosium or terbium through the whole volume — works, but it dilutes the energy product and adds cost. Grain boundary diffusion solves the same problem with far less heavy rare earth.
How the process works
The sintered magnet is coated or placed in contact with a heavy rare-earth source and then heat-treated. The diffusing element travels along the grain boundaries and forms a coercivity-enhancing shell around each grain, while the grain cores keep their high energy product. The result is a magnet whose surface layer resists demagnetisation and whose core keeps its flux.
What it buys the designer
A diffused N52-class magnet can be rated for 150 °C and above where the base grade is published at 80 °C. For motor and sensor builders that removes a thermal derating step, or lets a smaller magnet do the same hot-duty job.
Where YUECI KEJI's patents sit
The company holds utility-model patents on diluent mixing equipment for grain-boundary diffusion production, on infiltration tooling for high-abundance cerium-iron-boron material, and on mixing apparatus for low-temperature-coefficient material preparation. That equipment set is what makes the process repeatable batch to batch rather than a one-off laboratory result.
When it is worth specifying
Specify a diffused grade when your measured duty temperature exceeds the base-grade limit, or when a smaller magnet must deliver a fixed hot-duty force. If the part runs at ambient with margin, the base grade is usually the better value — and a good supplier will tell you so rather than upselling.
What the buyer should ask for
If you specify a diffused grade, ask for the measured intrinsic coercivity and the temperature class the lot was verified against, not only the grade label. A diffused part is only as good as the shell the process actually built, and that is a measured value rather than a label.
Common misconceptions
Two come up often. The first is that diffusion makes a magnet stronger in absolute terms — it makes it keep its strength at temperature, which is a different property. The second is that any hot-duty application needs it; many parts run comfortably inside the base-grade limit, and specifying a diffused grade there only adds cost.
Frequently asked questions
What does SH, UH, EH or AH actually mean? They are temperature classes. SH is published at up to 150 °C, UH at 180 °C, EH at 200 °C and AH at 230 °C at the reference geometry. Higher classes use more diffused heavy rare earth, so cost rises with the class.
Does diffusion reduce the energy product? Slightly, at the very surface layer, but far less than adding the same heavy rare earth through the whole volume. The core keeps the grade's energy product.
How do I know a lot really meets the class? Ask for measured intrinsic coercivity, not just the grade label. Lot records should carry the Hcj band the shipment was verified against.
Is diffusion only for neodymium magnets? It is used overwhelmingly on NdFeB because that is where the coercivity-versus-energy trade-off bites. Samarium-cobalt reaches its temperature performance through its own chemistry instead.
If your project needs a specific grade, geometry or magnetic result, Request a quote and share the drawing or the duty conditions.