Flexible Ferrite
Flexible Rubber Magnet Sheet
Flexible rubber magnet sheet is a bendable permanent-magnet material made by bonding strontium ferrite powder into a flexible polymer. YUECI KEJI calenders it to your thickness and cuts it to shape for signage, displays and sensor gaskets.
Specifications
| Material | Flexible ferrite (strontium ferrite powder in polymer binder) |
|---|---|
| Form | Calendered sheet, cut to size |
| Type | Isotropic / Anisotropic |
| Thickness | Custom, quoted per inquiry |
| Magnetization | Multi-pole (isotropic) / fixed direction (anisotropic) |
| Surface | Plain, or laminated on request |
| Applications | Signage, retail displays, crafts, sensor gaskets |
| Lead time | Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method. |
| MOQ | Quoted per inquiry |
| Export control | Export classification is confirmed per shipment against the product composition and destination. |
What a flexible rubber magnet sheet is
A flexible rubber magnet sheet is a bendable permanent-magnet material made by mixing strontium ferrite powder into a flexible polymer binder and calendering the mix into a thin, continuous sheet. The ferrite carries the magnetic field; the binder is what lets the sheet bend, roll and cut without cracking the way rigid ceramic ferrite would. YUECI KEJI calenders each lot to your requested thickness and supplies it as sheet or blank for downstream converting.
Isotropic and anisotropic sheet
Isotropic sheet can be magnetized in any direction after it is cut, which makes it ideal for multi-pole layouts and small or irregular parts. Anisotropic sheet is magnetized in a fixed direction during calendering, giving higher energy per thickness at a slightly higher cost. YUECI KEJI grades each lot and marks the pole sense so parts cannot be fitted the wrong way.
Cutting and shaping
Because the material is flexible, it cuts with a knife, die or rotary cutter and bends around curved steel surfaces. That convertibility is the main reason flexible sheet is chosen over rigid magnets for signage and craft work, where a thin, shapeable magnetic layer is worth more than raw field strength. YUECI KEJI can pre-cut blanks, strips and discs to your drawing.
Where it is used
Flexible rubber magnet sheet is the base layer for retail and point-of-sale signage, craft and education magnets, and thin sensor or switch gaskets. It is also the starting material that gets an adhesive or printable face added during converting. YUECI KEJI supplies both the raw sheet and the converted variants from one source.
Handling and storage
The sheet is flexible but not elastic — creasing or folding leaves a permanent mark, so store it flat or on the reel and avoid sharp bends. Keep it dry and away from strong demagnetizing fields; the flexible binder means the surface field is modest and handling is straightforward compared with neodymium. YUECI KEJI packs flat-pressed or reeled to protect the profile in transit.
Why buyers choose it
- Bends and cuts with a knife or die, unlike rigid ceramic ferrite.
- Holds a useful field while staying flexible and thin.
- Isotropic or anisotropic grades to match field and cost targets.
- Supplied as sheet or blank, ready for your own converting.
Applications
Retail and point-of-sale signage magnets
Craft, education and promotional magnet blanks
Flexible sensor and switch gaskets
Base layer for adhesive or printable converting
Buyer Questions
Flexible Rubber Magnet Sheet FAQs
What is a flexible rubber magnet sheet made of?
It is hard ferrite (strontium ferrite) powder dispersed in a flexible rubber or resin binder and calendered into a thin sheet. The binder is what lets it bend and cut, while the ferrite carries the magnetic field.
Isotropic or anisotropic — which should I choose?
Isotropic sheet can be magnetized in any direction after cutting, which suits multi-pole and small parts. Anisotropic sheet is magnetized during calendering for higher energy and a fixed direction; choose it when field strength per thickness matters most.
Can I cut it myself?
Yes. Thin sheet cuts cleanly with a knife, die or rotary cutter. YUECI KEJI also supplies pre-cut blanks and strips to your drawing.
Is it export Export documentation and licensing requirements are confirmed per shipment.?
Export classification is confirmed per shipment against the product composition and destination.
Request a quote for Flexible Ferrite Sheet
You may also like

