Flexible Ferrite
Isotropic Flexible Magnet Sheet
Isotropic flexible magnet sheet is calendered from strontium ferrite in a flexible binder with no fixed pole direction, so it can be magnetized any way you need after it is cut. YUECI KEJI supplies it as sheet, strip or blank for multi-pole and small-part converting.
Specifications
| Material | Flexible ferrite — strontium ferrite powder in polymer binder (non-oriented) |
|---|---|
| Form | Calendered sheet or strip, cut to size |
| Magnetization | Any direction after cutting — supports multi-pole layouts |
| Thickness | Custom, quoted per inquiry |
| Surface | Plain, adhesive-backed or printable on request |
| Applications | Multi-pole sensors, small magnets, craft and education |
| Lead time | Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method. |
| MOQ | Quoted per inquiry |
| Export control | Export classification is confirmed per shipment against the product composition and destination. |
What isotropic flexible magnet sheet is
Isotropic flexible magnet sheet is made by dispersing strontium ferrite powder in a flexible polymer binder and calendering it into a thin, continuous sheet without a fixed magnetization direction. The absence of a preferred pole direction is the defining feature: the sheet can be magnetized any way the application needs after it has been cut to shape. YUECI KEJI calenders each lot to your requested thickness and supplies it as sheet, strip or blank.
Why choose isotropic
Because there is no fixed pole axis, isotropic sheet is the right choice when the final magnetic pattern is decided late or varies between parts. It supports dense multi-pole layouts for encoders and sensors that a single-direction anisotropic sheet cannot reproduce, and it lets a single stock sheet serve many different pole designs. YUECI KEJI grades each lot for surface field consistency so converted parts behave predictably.
Cutting and converting
The material cuts with a knife, die or rotary cutter and bends around curved steel. That convertibility is what makes it the base stock for craft, education and small commercial magnets, where a thin shapeable magnetic layer matters more than raw field strength. YUECI KEJI pre-cuts blanks, strips and discs to your drawing and can apply adhesive or printable faces during converting.
Where it is used
Isotropic flexible sheet goes into multi-pole sensor and encoder gaskets, small or irregular flexible-magnet parts, and craft or promotional blanks. It is also the starting material that receives an adhesive or printable face in downstream converting. YUECI KEJI supplies both the raw isotropic sheet and the converted variants from one source.
Handling and storage
The sheet is flexible but not elastic — creasing leaves a permanent mark, so store it flat or on the reel and avoid sharp folds. Keep it dry and away from strong demagnetizing fields. The flexible binder means the surface field is modest and handling is straightforward compared with neodymium. YUECI KEJI packs flat-pressed or reeled to protect the profile in transit.
Why buyers choose it
- No fixed pole direction — magnetize to your layout after cutting.
- Supports dense multi-pole patterns that anisotropic sheet cannot.
- Cuts and shapes with knife, die or rotary cutter.
- Supplied as sheet, strip or pre-cut blank from one source.
Applications
Multi-pole magnetic encoders and sensor gaskets
Small or irregular flexible-magnet parts
Craft, education and promotional magnet blanks
Base stock for adhesive or printable converting
Buyer Questions
Isotropic Flexible Magnet Sheet FAQs
What makes isotropic sheet different from anisotropic?
Isotropic flexible sheet has no fixed magnetization direction, so you can magnetize it any way you want after it is cut — including dense multi-pole patterns. Anisotropic sheet is magnetized in one fixed direction during calendering and gives higher energy per thickness but cannot be re-oriented.
Can I magnetize it myself after cutting?
Yes. Because the material is non-oriented, it can be magnetized in any direction, including multi-pole, once it is in final shape. YUECI KEJI can also supply pre-magnetized blanks to your pole layout.
What thickness can I get?
Thickness is custom and quoted per inquiry; YUECI KEJI calenders each lot to your requested gauge and supplies sheet, strip or blank.
Is it export Export documentation and licensing requirements are confirmed per shipment.?
Export classification is confirmed per shipment against the product composition and destination.
Request a quote for Flexible Ferrite (Isotropic)
You may also like



