Custom Magnets
Custom Magnet Manufacturing
From a released drawing or a physical sample: we build sintered NdFeB, ferrite, SmCo and Alnico magnets to your grade, shape, coating and magnetisation pattern, and report what was measured on the way out.
How a custom order runs
Five steps from your first message to a delivered batch, with a written schedule before anything is cut.
Send the drawing or sample
A dimensioned PDF plus the duty conditions is enough to start. A physical sample works too, and we measure it before quoting.
Engineering review and quote
We check the geometry against what pressing, sintering and grinding can hold, then recommend grade, coating and magnetisation. You get a written quote and schedule.
Sample approval
First articles are measured and reported like a production batch: dimensions, magnetic values sampled on the hysteresisgraph, coating checks.
Production with in-process checks
Dimensions are verified after grinding and before coating; magnetic values are sampled per batch during production, not only at the end.
Final inspection and shipment
The batch ships with an inspection report and a material certificate, packed and marked for the transport mode you chose.
What can be customised
Catalogue shapes cover most work; anything outside them is quoted from the drawing. The variables below are the ones that decide cost and lead time, so it pays to fix them early.
- Available grades and temperature classes are confirmed against your drawing and operating conditions at quotation.
- Shapes: disc, block, ring, arc and segment, rod, cylinder, countersunk, tile, cube, sphere and custom profiles
- Coatings: nickel-copper-nickel, zinc, epoxy, parylene, tin, gold and phosphating
- Magnetisation: axial, diametric or radial, plus multipole and skewed pole patterns for motor and sensor duty
- Tolerances: ±1% on the controlling dimension as standard, tighter where the geometry and the process allow
- Assemblies: magnets bonded or housed in steel, aluminium or plastic carriers, with springs, studs or adhesive presets

Before You Ask
What to send with your enquiry
Six items let us quote accurately the first time.
- Drawing — PDF for review, DWG or DXF where dimensions and tolerances are dimensioned
- Grade or temperature — the grade you buy today, or the maximum operating temperature if the grade is open
- Coating and colour — the service environment decides this; send the environment if the coating is open
- Magnetisation direction — axial, diametric, radial or a pole pattern sketch
- Quantity — sample quantity and expected annual volume, which drive the tooling decision
- Constraints — target price, certification paperwork or a delivery window, where they exist
Schedule
Sampling and production rhythm
Published ranges, confirmed in writing per order.
| First samples | About 10 working days from drawing approval for catalogue shapes and standard grades |
|---|---|
| Standard-grade production | Typically 7 to 20 working days after order confirmation |
| Temperature classes (H, SH, UH, EH, AH) | Scheduled per quotation; dysprosium-bearing grades follow the confirmed date |
| Custom coatings and fixtures | Scheduled per quotation; special coatings add a pre-production sample step |
| Repeat orders | Tooling and the quality plan are on file, so the schedule starts at production |
Every date we quote is confirmed in writing before the order is placed. Where a project needs a different rhythm, tell us the constraint and we will say plainly whether it can be met.
Documents available on request
Technical documents we share during a project — request the current version from our team.
Go Deeper
Related reading
- OEM and ODM magnet customisation — what to send with an enquiry and what comes back
- The NdFeB manufacturing process — from strip casting to a finished, coated magnet
- Magnet machining and grinding — what the grinding step can and cannot hold
- Neodymium magnet coating options — how each finish behaves in service
Buyer Questions
Custom Manufacturing FAQs
What is the minimum order quantity?
Samples start at a few pieces for catalogue shapes. Production runs typically start in the hundreds; temperature classes and custom tooling carry their own minimums, which we state on the quotation.
Which file formats do you accept?
PDF for review, plus DWG or DXF where dimensions and tolerances are dimensioned. A physical sample works too: we measure the geometry and confirm the specification with you before quoting.
Can you match a magnet we already buy?
Send the part or its datasheet. We compare grade, coating, dimensions and magnetisation, then quote the closest match, or a drop-in alternative where the original has been discontinued.
Do you sign NDAs?
Yes. A mutual NDA can be in place before drawings change hands.
What tolerance is standard?
±1% on the controlling dimension unless the drawing says otherwise. Tighter tolerances are available where the shape and the grinding process allow, and are quoted per feature.
Send us the requirement
Tell us the application, the duty and the quantity. You get a specification, a schedule and a quote in writing.
Request a quote