EDUCATION

What Is an Alnico Magnet? High-Temperature Cast and Sintered Magnets | YUECI KEJI

An alnico magnet is the old master of the permanent-magnet family - an alloy of aluminium, nickel, cobalt and iron that has been in service since the 1930s. Its defining trait is extraordinary high-temperature stability.

An alnico magnet is the old master of the permanent-magnet family - an alloy of aluminium, nickel, cobalt and iron that has been in service since the 1930s. Its defining trait is extraordinary high-temperature stability: where neodymium and even samarium cobalt eventually falter, alnico keeps a steady field at temperatures that would demagnetise other magnets. This article explains what alnico is, how it is made, and where its peculiar strengths still earn it a place.

What alnico is

Alnico is an iron-based alloy whose name comes from its main additions: aluminium, nickel and cobalt, with copper and sometimes titanium rounding out the mix. It is made either by casting or by powder metallurgy (sintering). Cast alnico can be produced in complex shapes and is then heat-treated and magnetised; sintered alnico offers tighter tolerances and less machining. Both are hard and brittle and are finished by grinding rather than cutting.

Why alnico survives heat

Alnico's Curie temperature is very high compared with the rare-earth families, which lets it hold a useful field at service temperatures of several hundred degrees Celsius - far beyond the 80℃ ceiling of standard NdFeB and well above most SmCo duties. For applications that sit in engine bays, near furnaces or in industrial process heat, alnico's thermal stability is its single most valuable property, and it is the reason the material has outlasted several newer contenders in harsh heat.

The coercivity trade-off

Alnico's weakness is its low coercivity. It is comparatively easy to demagnetise, both by opposing fields and by rough handling, and it is often shipped and stored with a "keeper" - a soft-iron shunt that closes the magnetic circuit and protects the field. Designs using alnico must keep the magnetic circuit closed and avoid exposing the magnet to stray demagnetising fields. This is the opposite of NdFeB's high coercivity and is the main reason alnico is not a general-purpose replacement.

Where alnico is used

  • Sensors, meters and gauges that must read steady over wide temperature ranges
  • Aerospace and defence instruments exposed to heat and vibration
  • Guitar pickups and high-fidelity transducers prized for their tonal character
  • Educational and demonstration magnets
  • High-temperature holding and indicating applications

In these roles the magnet's job is to provide a stable, predictable bias field rather than maximum pull, which is exactly where alnico's profile fits.

Cast versus sintered alnico

Cast alnico is the traditional route: it can take complex shapes and is finished by grinding, which suits one-off and low-volume geometries. Sintered alnico is pressed and sintered like other permanent magnets, giving tighter dimensional control and less post-machining for simpler forms. The choice is driven by shape complexity and volume rather than by magnetic performance, which is similar between the two processes for comparable compositions.

Alnico versus the rare-earth families

Neodymium wins decisively on strength per volume and on coercivity, and samarium cobalt wins on combined heat and corrosion resistance. Alnico wins only where sustained high temperature and field stability trump everything else, and where its low coercivity can be managed by a closed magnetic circuit. It is a specialist, not a default, and it is typically chosen after the rare-earth options have been ruled out on heat grounds. For the neodymium side, see the NdFeB magnet overview.

Alnico in the field

You will find alnico wherever a steady field at heat matters more than pull: in temperature transmitters, in aircraft and defence instruments, and in guitar pickups where its particular tonal character is prized. In each, the magnet is doing quiet, invisible work holding a bias field stable across a wide temperature swing.

Care and storage

Because of its low coercivity, alnico should be kept with a keeper in storage and handled so it is not dragged past steel or other magnets in a way that partially demagnetises it. Re-magnetising is straightforward, but designing the circuit closed from the start avoids the need. Treat the keeper as part of the product, not an optional accessory.

Alnico magnetisation and poles

Alnico is often magnetised after assembly into the final magnetic circuit, because its low coercivity makes it vulnerable to partial demagnetisation during handling. Multi-pole and complex pole patterns are achieved by the magnetising fixture rather than by the alloy, which is why the magnetiser and the circuit are specified together.

Heat, corrosion and alnico

Alnico is stable at high temperature and reasonably resistant to corrosion, though edges can discolour or oxidise in harsh environments and are sometimes painted or plated. Its main vulnerability is magnetic, not chemical, so the design focus stays on keeping the circuit closed and the field protected.

Why alnico persists

Despite newer magnets, alnico survives because few materials hold a stable field at several hundred degrees Celsius. Where that property is the binding constraint, alnico remains the pragmatic, proven choice rather than a legacy curiosity.

Alnico and temperature sensors

The classic use is in temperature transmitters and gauges, where a stable bias field must hold across a wide span; alnico's high Curie point keeps the field predictable where neodymium would drift. This is a quiet but critical role in process and aerospace instrumentation.

Alnico versus ferrite on heat

Ferrite is also temperature-stable and far cheaper, but it is much weaker; where the field must be both stable and reasonably strong at heat, alnico fills the gap that ferrite cannot. NdFeB and SmCo cover lower and mid heat ranges, leaving alnico as the high-heat specialist among the stable-field materials.

Alnico and the rare-earth magnets

Alnico predates the rare-earth families and complements rather than competes with them. Where neodymium gives strength and SmCo gives heat plus corrosion resistance, alnico gives the highest stable-field temperature of the common permanent magnets, which is why it still appears in instruments and sensors that the newer materials cannot displace on heat grounds alone.

Buying alnico

Because alnico is a lower-volume, often cast material, lead times and minimum order quantities differ from sintered rare-earth parts. Discuss shape complexity and volume early, and decide between cast and sintered based on geometry rather than assuming one route fits all forms.

Frequently asked questions

Why does alnico need a keeper? Its low coercivity makes it prone to demagnetisation, so a soft-iron keeper closes the circuit during storage and handling to protect the field.

How hot can alnico get? Alnico's very high Curie temperature lets it retain a useful field at several hundred degrees Celsius, far above the limits of standard neodymium.

Is alnico stronger than neodymium? No. Neodymium offers far higher energy product; alnico's advantage is temperature stability, not raw strength.

Cast or sintered alnico - which to choose? Cast alnico suits complex shapes and is finished by grinding; sintered alnico gives tighter tolerances and less post-machining for simpler geometries.

Is alnico brittle like neodymium? Yes, both are hard and brittle and are finished by grinding rather than cutting, so mounting should avoid tensile and point loads.

If your design needs a stable field at high temperature, Request a quote and share the operating temperature and circuit so alnico or another high-temperature magnet can be assessed.