Applications

Magnets for Wireless Charging: Alignment Arrays and Coil Coupling | YUECI KEJI

Every wireless charger that snaps a device into place is using permanent magnets for alignment. The parts are small, the volumes are enormous, and consistency across millions of units is the real specification.

Every wireless charger that snaps a device into place is using permanent magnets for alignment. The parts are small, the volumes are enormous, and consistency across millions of units is the real specification.

Why charging needs magnets

Inductive charging efficiency falls sharply with coil misalignment, so a charger has to hold the device in the right place. Magnets do that mechanically — a ring or an array in the charger, a matching set in the device — while the coil does the electrical work.

The magnet array

Alignment hardware is typically a ring, a set of discs or a patterned array arranged around the coil. Polarity pattern and dimensional consistency matter more than raw force, because the array has to attract uniformly without fighting itself.

Shielding and interference

A charging coil's field must reach the device rather than the magnet or the housing. Ferrite or steel shielding directs the field, and the magnet selection has to be compatible with it. Poorly chosen magnets heat, distort the field or both.

What volume production demands

Tooling discipline, coating uniformity, polarity verification and packing that prevents chipping. YUECI KEJI supplies alignment magnets and arrays to drawing with per-lot inspection records.

Frequently asked questions

Are alignment magnets supplied as arrays? Yes — rings, disc sets or patterned arrays, with the polarity pattern agreed against your coil design.

Does the magnet interfere with charging? It can if it is not compatible with the shielding. Magnet material, position and shielding are specified together.

What tolerance applies? Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

Can you support volume forecasts? Yes. Share the annual volume and we will plan tooling and capacity accordingly.

If your application is covered here, Request a quote with the drawing or the duty conditions and we will confirm what is feasible.