Applications

Magnets for Automotive Sensors: Position, Speed and Current Sensing | YUECI KEJI

Most magnets in a vehicle never produce motion; they report it. Automotive sensors are high-volume, precision applications where the magnet is part of a measurement chain.

Most magnets in a vehicle never produce motion; they report it. Automotive sensors are high-volume, precision applications where the magnet is part of a measurement chain.

The sensor families that use magnets

Crankshaft and camshaft position, transmission speed, wheel speed for ABS and stability control, throttle and pedal position, steering angle, and current sensing in the battery and power electronics. Each pairs a magnet with a Hall, magnetoresistive or fluxgate element.

Why the magnet is a precision part here

A sensor magnet has to deliver a stable, repeatable field across a wide temperature range and a long service life. That makes temperature coefficient, coercivity margin and dimensional stability the governing properties, not peak energy product.

Material and grade selection

Most automotive sensor magnets are small NdFeB parts in standard grades, plated for corrosion resistance. Where the sensor sits near the engine or exhaust, a temperature class such as M, H or SH is specified. Ferrite appears in cost-sensitive, lower-sensitivity positions.

What automotive duty demands

Documented process control, lot traceability and change notification, because a sensor is validated as a system. YUECI KEJI operates under a quality system aligned with IATF16949 and ISO 9001/14001/45001 and reports each lot before dispatch.

Frequently asked questions

Which grade suits an engine-bay sensor? The temperature class matters more than the energy level. Send the hot-spot figure and we will match M, H or SH.

Do you supply magnetised to a pole pattern? Yes. Pole count and magnetisation direction are set by the sensor design and verified per lot.

What tolerance is typical? Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.

Can you support change notification? Yes. Material and process changes are notified before they take effect, which is what a validated sensor programme needs.

If your application is covered here, Request a quote with the drawing or the duty conditions and we will confirm what is feasible.