Guides

Magnet Temperature Coefficient Explained: Why Magnets Lose Output With Heat | YUECI KEJI

Every permanent magnet loses output as it gets hotter. The rate at which it does so is the temperature coefficient, and understanding it explains why the same grade behaves differently in two geometries.

Every permanent magnet loses output as it gets hotter. The rate at which it does so is the temperature coefficient, and understanding it explains why the same grade behaves differently in two geometries.

Two coefficients, two different losses

Remanence falls with temperature at a reversible rate — the magnet recovers when it cools. Intrinsic coercivity falls faster and, past a point, the loss becomes permanent. The first is a performance loss; the second is damage.

The published figures

For sintered NdFeB, the reversible temperature coefficient of remanence is roughly -0.085 to -0.125 %/K and that of intrinsic coercivity is roughly -0.42 to -0.80 %/K. In plain terms, coercivity is several times more temperature-sensitive than remanence, which is why hot duty is a coercivity problem rather than a flux problem.

Why geometry changes the answer

A magnet's working point depends on its shape. A long magnet relative to its diameter works at a favourable point and loses less; a thin disc works at a poor point and loses more. That is why the same grade is published at different usable temperatures in different geometries.

What this means when specifying

Send the hot-spot temperature, the acceptable permanent loss and the geometry. The grade and temperature class follow from all three together, and the geometry is often the cheapest thing to change.

Frequently asked questions

Is flux loss with heat permanent? Reversible loss recovers on cooling. Past the coercivity limit the loss becomes permanent, which is why the maximum working temperature matters.

Which coefficient matters more? Coercivity, because it falls several times faster and it is the one whose loss becomes permanent.

Why does a thin disc fail sooner than a block? A thin disc works at a poor operating point, so it demagnetises more easily. Shape is often the cheapest lever available.

How do you confirm the temperature limit? Send the geometry, the hot-spot temperature and the acceptable loss, and we will confirm the grade and class against your duty.

If your question is not covered here, Request a quote and our engineering team will answer it directly.