SmCo
Samarium Cobalt (SmCo) Magnet
Export documentation and licensing requirements are confirmed per shipment.
Specifications
| Grade | SmCo |
|---|---|
| Shape | Disc / Block / Ring |
| Coating | Ni-Cu-Ni, Zn, Epoxy, Au (custom on request) |
| Tolerance | Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation. |
| Magnetization | Axial / Radial |
| Applications | High-temp actuators, Downhole sensors, Corrosive / vacuum |
| Lead time | Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method. |
| MOQ | Quoted per inquiry |
| Export control | Export documentation and licensing requirements are confirmed per shipment. |
What samarium-cobalt (SmCo) offers
Export documentation and licensing requirements are confirmed per shipment.
SmCo magnetic performance
A typical SmCo (Sm2Co17) grade delivers a remanence (Br) of about 1.05-1.12 T (10.5-11.2 kGs), an intrinsic coercivity (Hcj) of at least 1592 kA/m (20 kOe) and a maximum energy product (BH)max of 24-30 MGOe. Its defining property is thermal: where standard NdFeB fades above 80 degrees C and even SH grades cap near 150-230 degrees C, SmCo holds to around 300 degrees C with negligible irreversible loss.
SmCo versus NdFeB, when to choose which
Choose NdFeB when you need maximum flux per cubic centimetre at moderate temperature and lowest cost; choose SmCo when the duty is hot, corrosive, or in a vacuum where plating would outgas or flake. SmCo's corrosion resistance means no coating to maintain, which also removes a failure mode in wash-down and sterile environments. The trade is lower energy product and higher material cost than NdFeB.
Forms and magnetization
SmCo is supplied as discs, blocks and rings, ground to plus or minus 1 percent with a tight plus or minus 0.05 mm option, magnetized axially or radially to drawing. Because the material is brittle and abrasively hard, finish grinding rather than cutting is the norm; YUECI KEJI controls pole identity and orientation for assembly.
Export control and end-use review
Export documentation and licensing requirements are confirmed per shipment.
Typical applications
SmCo is used in aerospace and defense high-temperature actuators, downhole, turbine and industrial hot-zone sensors, and corrosive or vacuum environments such as semiconductor and analytical instruments.
Handling, storage and shipping
SmCo is brittle and chips at edges; it is less prone to corrosion than NdFeB but still handled with spacers. The YUECI KEJI quality system is aligned with IATF16949 and ISO 9001/14001/45001, and lots are traceable. For Export documentation and licensing requirements are confirmed per shipment..
To discuss an SmCo disc, block or ring for a hot or corrosive duty, Request a quote and the YUECI KEJI team will confirm grade, licensing and lead time.
Why buyers choose it
- Stable to roughly 300 °C, far above NdFeB's ceiling.
- Corrosion-resistant without plating — no coating to flake.
- Export documentation and licensing requirements are confirmed per shipment.
- Disc, block and ring forms to drawing.
Applications
Aerospace and defense high-temp actuators
Downhole, turbine and industrial hot-zone sensors
Corrosive or vacuum environments
Buyer Questions
Samarium Cobalt (SmCo) Magnet FAQs
SmCo or NdFeB — which to choose?
Pick SmCo when temperature, corrosion or vacuum rules out plated NdFeB; NdFeB wins on raw flux and cost at room temperature.
Why is SmCo export-Export documentation and licensing requirements are confirmed per shipment.?
Export documentation and licensing requirements are confirmed per shipment.
Lead time?
Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
Request a quote for SmCo
You may also like



