NdFeB
Neodymium Sphere Magnet
Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
Specifications
| Grade | N52 |
|---|---|
| Shape | Sphere |
| Coating | Ni-Cu-Ni, Zn, Epoxy, Au (custom on request) |
| Tolerance | Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation. |
| Magnetization | Through the centre (diametric) |
| Applications | Education and demonstration, novelty, craft and design builds, sensor and probe balls |
| Lead time | Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method. |
| MOQ | Quoted per inquiry |
| Export control | Export classification is confirmed per shipment against the product composition and destination. |
What is an N52 sphere magnet
Neodymium sphere magnets are sintered NdFeB balls, ground to diameter and magnetized through the centre so that the two poles sit on opposite sides. The sphere is the demonstration shape of the industry and a genuine engineering part where a magnet has to present the same field from any direction.
N52 magnetic performance
Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.
Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.
Why choose N52
A sphere is the only geometry whose field does not depend on approach angle. That makes it the teaching shape and the probe shape, and it is why sphere magnets remain a standard catalogue item rather than a novelty.
Shape, dimensional tolerance and magnetization
Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
Surface treatment
Test conditions and reports are available on request.
Coating choice follows the environment: bright Ni-Cu-Ni for indoor and clean-room work, zinc for cost-sensitive volume, and epoxy where the part is handled, exposed to salt mist or must not glare. Bare NdFeB corrodes quickly, so every sphere leaves the plant coated unless the brief explicitly calls for a phosphated or as-ground finish.
Typical applications
Neodymium spheres end up in education and demonstration, craft and design builds, and sensor or probe balls where the approach direction is not fixed. They are also the unit that magnetic-ball toy sets are built from.
Handling, storage and shipping
Sintered NdFeB is hard but brittle: it chips on impact and pinches fiercely when it snaps to steel. Parts ship in padded, magnetically shielded or spaced packing with keepers where the design calls for them, and air freight follows IATA packing instruction 902 with the field at the package surface measured before dispatch.
Custom sizing, prototyping and order minimums
Every dimension, grade suffix, coating and magnetization direction is built to your drawing or reproduced from your sample. Samples and small batches come first, then volume; repeat orders are faster because the tooling and the inspection routine already exist. Minimum order quantities are quoted per inquiry against the geometry and the grade.
Grade, temperature and coating — how this part is specified
A complete specification names the grade (including the temperature suffix), the shape and dimensions with tolerances, the magnetization direction, the coating and the destination. With those five points YUECI KEJI quotes quickly; with any of them missing the project waits. Working temperature is set by the suffix, not by the shape, and the coating is set by the environment.
Designing the magnetic circuit and working on the line
A sphere’s pull force is modest for its volume because the pole area is small; where force matters, a disc of the same diameter beats it easily. Choose a sphere for direction-independence and demonstration value, not for maximum holding force.
When to choose a different shape
A sphere is the default for demonstration. Move to a cube when flat faces help the fixture, to a disc when force matters, and to a rod when the field must travel along an axis.
Where this material is typically used
Sintered NdFeB spheres end up in classrooms, craft and design work, and probe assemblies — the jobs where the field has to be the same from every side.
Why buyers choose it
- Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
- Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.
- Diametric magnetization through the centre — the same field from every approach angle.
- Coatings from bright Ni-Cu-Ni to non-reflective black epoxy; spheres are always coated, never bare.
Applications
Education and demonstration
Novelty, craft and design builds
Sensor and probe balls
Buyer Questions
Neodymium Sphere Magnet FAQs
Why is a sphere the demonstration shape?
The field is identical from every approach angle because the poles sit on opposite sides of the centre. A disc only shows its full field face-on.
Are small spheres safe to supply?
Spheres are supplied with handling guidance and in appropriate packing. They are strong enough to pinch and to swallow, so they belong in supervised and adult assemblies, not with small children.
Are neodymium spheres export Export documentation and licensing requirements are confirmed per shipment.?
Export classification is confirmed per shipment against the product composition and destination.
Request a quote for N52
You may also like
