NdFeB
NdFeB Block Blank (N25–N52)
NdFeB Block Blank (N25–N52) is supplied to your approved drawing; grades, coatings, magnetization direction and dimensional tolerances are confirmed at quotation.
Applications
Further machining into custom parts
Blank stock for in-house fabrication
Cost-effective large-volume supply
Why buyers choose it
- NdFeB Block Blank (N25–N52) — built to your approved drawing, with grades, coatings and tolerances confirmed at quotation.
- Supplied unmagnetized for safe, simple cutting and grinding.
- Bulk blank stock for cost-effective large-volume programs.
- Material certificate and traceability on request.
Specifications
| Grade | Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation. |
|---|---|
| Shape | Block (Raw/Blank) |
| Coating | Ni-Cu-Ni, Zn, Epoxy, Au (custom on request) |
| Tolerance | Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation. |
| Magnetization | As-machined / Axial |
| Applications | In-house machining stock, Custom part blanks, Volume supply |
| Lead time | Production lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method. |
| MOQ | Quoted per inquiry |
| Export control | Export classification is confirmed per shipment against the product composition and destination. |
What is a NdFeB block blank
A NdFeB block blank is unmagnetized or lightly finished sintered-neodymium stock supplied as a rectangular block for you to machine, cut, drill or grind into a final part in your own shop. YUECI KEJI supplies N25 to N52 blanks across the dimension and grade range your process needs, with material certificates and lot traceability so the stock entering your line is documented from powder to block.
Grade range and magnetic performance
Available grades, temperature ratings and coatings are confirmed against your drawing and operating conditions at quotation.
Why supply blanks unmagnetized
Unmagnetized stock is safer and cheaper to machine: there is no clamping force pulling swarf and tooling, no risk of attracting steel debris, and no field to fight while grinding. You magnetize the finished part after machining, or leave it unmagnetized if the assembly is magnetized as a whole. YUECI KEJI can ship blanks pre-magnetized on request, but most fabricators prefer the unmagnetized route for volume programs.
Dimensional tolerance and finishing
Dimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
Surface treatment after machining
Because you machine the part, coating is usually applied after final shape, but YUECI KEJI can pre-coat blanks with Ni-Cu-Ni, zinc, epoxy or gold if your process allows, or supply bare stock for your own plating line. Bare NdFeB corrodes in humid air, so plan the coating step before the part sees service.
Typical applications
Block blanks feed in-house fabrication of custom rotors, holding fixtures, sensor targets and prototype parts, and they let volume programs hold buffer stock without committing to a finished geometry. They are the flexible starting point when the final shape is still evolving or varies by order.
Handling, storage and shipping
Sintered NdFeB is brittle: support blanks during cutting and keep them separated with spacers. Store dry, away from electronics and cards. For air freight, YUECI KEJI can supply declared packing that keeps the package surface field within carrier limits. The YUECI KEJI quality system is aligned with IATF16949 and ISO 9001/14001/45001, and lots carry traceable inspection records.
If you need a specific grade, size or coating on block blank stock, Request a quote and the YUECI KEJI engineering team will confirm feasibility and lead time.
Buyer Questions
NdFeB Block Blank (N25–N52) FAQs
Do you ship blanks magnetized?
Usually unmagnetized, which is safer and easier to machine; we can magnetize after your finish step or supply pre-magnetized lots if your process needs it.
Which grade for machining?
Lower grades such as N35–N42 machine a little more easily and cost less; reserve N52 for where flux density is the constraint. Tell us the end use.
Export licensing?
Export classification is confirmed per shipment against the product composition and destination.
Request a quote for N25–N52
You may also like



