Ferrite

Ferrite Ring Magnet

Ferrite ring magnets are low-cost ceramic annuli with a through-bore for shafts, rotors and sensors. YUECI KEJI presses and magnetizes ferrite rings to drawing with no plating needed for corrosion resistance.

Ferrite Ring Ceramic Concentric bore Low cost
Ferrite Ring Magnet - YUECI KEJI

Applications

Small motor rotors and stators

Rotary sensors and encoders

Magnetic couplings and latches

Why buyers choose it

  • Ferrite is the lowest-cost permanent magnet family per unit.
  • Through-bore lets the ring seat on a shaft or pass a wire.
  • Naturally corrosion resistant — no plating required.
  • Pressed to shape, so large rings are practical.

Specifications

GradeHard ferrite (ceramic)
ShapeRing
CoatingAs-pressed / painted / epoxy on request
ToleranceDimensional tolerances are confirmed against the approved drawing and depend on part size, geometry and finishing process. Please identify critical dimensions when requesting a quotation.
MagnetizationAxial / Radial
ApplicationsMotor rotors, Sensors, Magnetic couplings
Lead timeProduction lead time and shipping transit time are quoted separately. The confirmed schedule depends on the approved drawing, quantity, documentation requirements, destination and shipping method.
MOQQuoted per inquiry
Export controlExport classification is confirmed per shipment against the product composition and destination.

What a ferrite ring magnet is

A ferrite ring magnet is an annular ceramic pressed from strontium or barium ferrite powder, with a hole that lets it sit on a shaft or nest in a housing. The ring carries its working field across the bore, which is why it appears in motor rotors, bearing sensors and rotary encoders. YUECI KEJI presses rings to your drawing and grades each lot.

Geometry and dimensional control

A ring is specified as inner diameter × outer diameter × thickness. YUECI KEJI holds each dimension to a standard commercial tolerance, with tighter limits for running parts, and controls bore concentricity so the ring spins true on its shaft. Because ferrite is pressed rather than machined, rings are practical across a wide size range.

Magnetization across the bore

Radial magnetization — north on the outer wall and south on the inner wall (or vice versa) — is standard for rings and puts the field where a shaft or sensor sees it. Axial and diametric patterns are available on request, and YUECI KEJI marks the pole sense so the ring cannot be fitted the wrong way.

Why ferrite rings

Ferrite is the lowest-cost permanent-magnet family and needs no plating to resist corrosion, which is why it is the cost-default for high-volume motors, sensors and holding. The annulus form delivers the field exactly across the bore where a rotating assembly needs it.

Handling and storage

Annular ferrite rings are brittle ceramics that chip if dropped or over-clamped, but they will not rust and their weaker field is safer to handle than neodymium. Store dry, away from strong demagnetizing fields; air-freight packing is simple because the surface field is low. YUECI KEJI works to a quality system aligned with IATF16949 and ISO 9001/14001/45001, with traceable lot records.

If your rotor or sensor needs a low-cost annulus, Request a quote for ferrite ring and the YUECI KEJI team will confirm dimensions, grade and magnetization.

Buyer Questions

Ferrite Ring Magnet FAQs

Can ferrite rings be magnetized radially?

Yes. Axial through the faces or radial (field inward or outward from the bore) are both cut to drawing, and we mark the pole direction for assembly.

Why choose ferrite over neodymium for a ring?

When the field requirement is modest and volume is high, ferrite is far cheaper and needs no plating. Choose neodymium when force per size is the constraint.

Are ferrite rings export Export documentation and licensing requirements are confirmed per shipment.?

Export classification is confirmed per shipment against the product composition and destination.

Request a quote for Ferrite